Operating Instructions
Table Of Contents
- 1. Introduction
- 2. Technical customer support
- 3. Functional description
- 4. Unpacking, transporting, storing
- 5. Technical data – Device
- 6. Technical data – Radio modules (all optional)
- 7. Operation
- 8. General device configuration
- 9. Wi-Fi configuration
- 10. WWAN configuration
- 11. Mechanical installation
- 12. Electrical installation, cable connection, cable cover
- 13. Connectors
- 14. Integrated power supply, power supply cable
- 15. Optional equipment
- 16. Maintenance
- 17. Malfunctions and troubleshooting
- 18. Reasonably foreseeable misuse
- 19. Guidelines and certificates
- 20. End-of-life device disposal
- 21. List of figures
Guidelines and certificates
DLT-V72 Operating Instructions V2.50 Preliminary 137 / 140
I
)&&,'I6(' ID
Please find the FCCID/ISED ID on the device lables.
DLT-V72 devices are restricted to indoor use only when operating within 5150-5350 MHz frequency range.
19.4. China
Numerous DLT-V72 models are approved for the Chinese market and carry the appropriate labeling on
the device.
19.5. Taiwan
Numerous DLT-V72 models are approved for the Taiwanese market and carry the appropriate labeling
on the device.
19.6. MIC Japan (previously TELEC)
In several of the DLT-V72 series, the PE15N PCI Express Mini Card from Laird is used. Laird has
implemented the following MIC certifications for this:
− Article 2 Item 19, Category WW (2.4 GHz Channels 1 - 13)
− Article 2 Item 19-2, Category GZ (2.4 GHz Chanel 14)
− Article 2 Item 19-2, Category XW (5150-5250 W52 & 5250-5350 W53)
− Article 2 Item 19-2, Category YW (5470-5725 W56)
Source:
http://www.lairdtech.com/Products/Embedded-Wireless-Solutions/Summit-Wi-Fi-Radio-Modules/Device-
Certification-Guide/#MIC