Operating Instructions
Table Of Contents
- 1. Introduction
- 2. Technical customer support
- 3. Functional description
- 4. Unpacking, transporting, storing
- 5. Technical data – Device
- 6. Technical data – Radio modules (all optional)
- 7. Operation
- 8. General device configuration
- 9. Wi-Fi configuration
- 10. WWAN configuration
- 11. Mechanical installation
- 12. Electrical installation, cable connection, cable cover
- 13. Connectors
- 14. Integrated power supply, power supply cable
- 15. Optional equipment
- 16. Maintenance
- 17. Malfunctions and troubleshooting
- 18. Reasonably foreseeable misuse
- 19. Guidelines and certificates
- 20. End-of-life device disposal
- 21. List of figures
Operation
36 / 140 DLT-V72 Operating Instructions V2.50 Preliminary
7. Operation
7.1. Switching the DLT-V72 on/off
The following factors determine how the DLT-V72 can be switched on and off:
− Is the DLT-V72 mounted on a vehicle and connected with the ignition signal?
− What are the automatic shutdown settings that were defined in the DLoG Config configuration
program?
7.1.1. Switch on
Switch the DLT-V72 on as follows, depending on the configuration:
Press the <Power> button.
Or: By applying the supply voltage.
Or: Through the ignition signal of the vehicle (depends on automatic shutdown settings).
Fig. 7.1: <Power> button of the DLT-V72