Operating Instructions
Table Of Contents
- 1. Introduction
- 2. Technical customer support
- 3. Functional description
- 4. Unpacking, transporting, storing
- 5. Technical data – Device
- 6. Technical data – Radio modules (all optional)
- 7. Operation
- 8. General device configuration
- 9. Wi-Fi configuration
- 10. WWAN configuration
- 11. Mechanical installation
- 12. Electrical installation, cable connection, cable cover
- 13. Connectors
- 14. Integrated power supply, power supply cable
- 15. Optional equipment
- 16. Maintenance
- 17. Malfunctions and troubleshooting
- 18. Reasonably foreseeable misuse
- 19. Guidelines and certificates
- 20. End-of-life device disposal
- 21. List of figures
Operation
44 / 140 DLT-V72 Operating Instructions V2.50 Preliminary
7.4. Operating states
Status of LEDs
DLT-V72 status
Supply voltage
Temperature
OFF OFF Initial state, idle time – waiting for a new
ignition signal or for the <Power> key after
switch-off; no voltage supply
OFF FLASHING Temperature sensor faulty
FLASHING OFF DLT-V72 is in standby mode (S3)
OFF ON
Computer will only start if the temperature in
the device is in the range between -30 and
+59 °C again.
ON OFF Computer start-up/normal operational
state/shutdown delay time
ON ON Screen defroster active
ON FLASHING Ambient temperature lies outside of the
permitted range, i.e. < -30 or > +50 °C