Operating Instructions

ManualsBrandsAdvantech ManualsElectronicsComputer

100

Table Of Contents

1. Introduction
- 1.1. Information about the DLT-V72 manuals
2. Technical customer support
3. Functional description
- 3.1. Intended use
- 3.2. Mount, operate and service the device correctly
- 3.3. Device identification/name plate
4. Unpacking, transporting, storing
- 4.1. Unpacking
- 4.2. Transport
- 4.3. Storage
5. Technical data – Device
- 5.1. General
- 5.2. Environmental conditions
- 5.3. Device dimensions
- 5.4. Position of VESA drill holes
6. Technical data – Radio modules (all optional)
- 6.1. Identification of the equipment variants
- 6.2. Radio cards (optional)
- 6.3. Antennas (all optional)
- 6.4. Bluetooth (optional)
- 6.5. GPS receiver external (optional)
7. Operation
- 7.1. Switching the DLT-V72 on/off
- 7.2. Operating the touchscreen
- 7.3. Operation elements
- 7.4. Operating states
- 7.5. Software keyboard (optional)
- 7.6. Operating the DLT-V72 with UPS
8. General device configuration
- 8.1. Operating systems available (optional)
- 8.2. MS-Windows (optional)
- 8.3. Android
- 8.4. Linux (optional)
- 8.5. Automatic shut down
9. Wi-Fi configuration
- 9.1. Safety notice
- 9.2. Differences between MS Windows and Linux
- 9.3. Preparation work at the factory
- 9.4. Customer-specific settings
- 9.5. Windows Zero Configuration (WZC)
- 9.6. Advantech Wi-Fi Client Manager (IGX Tool)
10. WWAN configuration
- 10.1. Safety notice
- 10.2. Differences between MS Windows and Linux
- 10.3. Preparation work at the factory (DLT-V72 delivery status)
- 10.4. SIM card for WWAN (customer-specific)
- 10.5. Configuration of radio card SIERRA WIRELESS MC80
- 10.6. Configuration of Radio card QUECTEL EC25
11. Mechanical installation
- 11.1. Safety notice – observe before installing
- 11.2. Mounting the DLT-V72 at the deployment location
- 11.3. Attaching accessories to the DLT-V72
12. Electrical installation, cable connection, cable cover
- 12.1. Safety notice – observe before connecting
- 12.2. Preparations
- 12.3. Inserting the rubber seal in the cable compartment
- 12.4. Connecting the USB, Ethernet and COM cables
- 12.5. Closing off unused cable openings
- 12.6. Attaching the cable cover
13. Connectors
- 13.1. Under the cable cover
- 13.2. Under the antenna
14. Integrated power supply, power supply cable
15. Optional equipment
- 15.1. Integrated UPS (optional)
- 15.2. Screen defroster (optional)
- 15.3. Keyboards and keyboard mounts (optional)
- 15.4. Scanner and scanner bracket (optional)
- 15.5. Touch stylus
- 15.6. USB recovery stick (optional)
- 15.7. Protective film for touchscreen (optional)
- 15.8. Screen blanking (optional)
16. Maintenance
- 16.1. Manufacturer, authorized service centers
- 16.2. Replacing the integrated keyboard of the DLT-V7210 K, KD
- 16.3. Regular checks and maintenance of the complete system
- 16.4. Replacing the battery pack
- 16.5. Cleaning the DLT-V72
- 16.6. Touchscreen protective film (optional)
17. Malfunctions and troubleshooting
18. Reasonably foreseeable misuse
19. Guidelines and certificates
- 19.1. Simplified EU declaration of conformity
- 19.2. Low-voltage guidelines
- 19.3. EMC guidelines
- 19.4. China
- 19.5. Taiwan
- 19.6. MIC Japan (previously TELEC)
20. End-of-life device disposal
21. List of figures

Electrical installation, cable connection, cable cover

DLT-V72 Operating Instructions V2.50 Preliminary 101 / 140

12. Electrical installation, cable connection, cable cover

12.1. Safety notice – observe before connecting

WARNING

Risk of injury and damage due to improper electrical installation.

These instructions are directed to skilled personnel.

 Only qualified skilled personnel are permitted to perform the electrical installation of the

DLT-V72.

 Comply with the appropriate national installation regulations for any and all cable routing.

Electrical shock due to insufficient EMERGENCY shut-off of the vehicle.

If the EMERGENCY-OFF switch of the vehicle does not switch off the DLT-V72, there is a risk

of electrical shock.

 Install the DLT-V72 and the EMERGENCY-OFF switch so that the DLT-V72 also switches

off when the EMERGENCY-OFF switch is operated.

 Important: If a DLT-V72 with integrated UPS is installed in a vehicle, the EMERGENCY-

OFF switch of the vehicle has no effect on the DLT-V72. This also applies to the

peripherals supplied by the device.

Deployment location fueling stations, chemical plants.

The operation of electrical equipment at locations where flammable gases or vapors are present

poses a safety hazard.

 Turn off the DLT-V72 when you are near gas stations, fuel depots, chemical plants or

places where blasting operations take place.

NOTICE: Physical damage

Overvoltage on the DLT-V72 when charging the vehicle battery.

The DLT-V72 must be disconnected from the vehicle battery while the vehicle battery is being

charged. Or it must be ensured that the maximum permitted input voltage of the DLT-V72 is

not exceeded.