Operating Instructions
Table Of Contents
- 1. Introduction
- 2. Technical customer support
- 3. Functional description
- 4. Unpacking, transporting, storing
- 5. Technical data – Device
- 6. Technical data – Radio modules (all optional)
- 7. Operation
- 8. General device configuration
- 9. Wi-Fi configuration
- 10. WWAN configuration
- 11. Mechanical installation
- 12. Electrical installation, cable connection, cable cover
- 13. Connectors
- 14. Integrated power supply, power supply cable
- 15. Optional equipment
- 16. Maintenance
- 17. Malfunctions and troubleshooting
- 18. Reasonably foreseeable misuse
- 19. Guidelines and certificates
- 20. End-of-life device disposal
- 21. List of figures
Electrical installation, cable connection, cable cover
102 / 140 DLT-V72 Operating Instructions V2.50 Preliminary
12.2. Preparations
Lay out ready all cables that are to be connected to the DLT-V72.
Select the appropriate slots on the connector panel of the DLT-V72.
Test in which order the cables best fit in the cable compartment.
12.2.1. Material required
Cable sealing set (scope of delivery: cable cover)
Cable cover and rubber seal
Cable clips Screws
Tools
− Hexagon screwdriver, size 3
− Philips screwdriver, size 3
− Torque wrench
− Allen wrench, size 2.5
− Flat head screwdriver, size 0
− Socket wrench, size 7