User's Manual

WLAN Configuration
DLT-V72 Series User Manual V2.74
120 / 189
10.8.11. Roam Management
General tab
After clicking the General dialog, the following information is displayed on the screen:
Fig. 10.30: General dialog in the Roam Management menu
Info section
Info
Meaning of the display
Client Status
Current connection status: Connected / Disconnected
Network Name SSID
SSID of the currently connected access points
Network Type
Network type Ad-hoc or Infrastructure
AP BSSID
Corresponding MAC address of the currently connected access
points
Channel
Displays the configured channel used in the access point
Mode
Frequency band used, e.g. "802.11g"
Signal Strength (dBm)
Current signal strength of the connected access points in (dBm)
SNR
Relative signal strength (SNR) as bar chart
Radio Power on Time
(sec)
Display of the current elapsed operating time of the Radio card
Country Code
The country code supplied by the access point such as US, DE, JP
IP Address
The Client IP address configured by the access point (DHCP) or
manually (static) assigned
CCX AP Name
SSID of the Cisco CCX Access Points (if present)