User's Manual

Safety Chapter
DLT-V72 Series User Manual V2.74
19 / 189
2.5. Information on safe mounting
During the mounting process
The DLT-V72 can fall down and cause injuries due to its weight.
1. Use the assistance of a second person for installation work.
2. Always hold the DLT-V72 by the housing with both hands.
3. Never use the antenna cap as a handle as it may break due to the weight
involved.
The strain relief rail of the DLT-V72 can have sharp edges and cause cutting injuries.
1. Do not hold the DLT-V72 by the strain relief rail.
Choosing the mounting position and installation environment
The installation height of the device shall not exceed 2 m.
1. The ergonomic operability of the DLT-V72 should be taken into account
when selecting the mounting position.
2. Mount the DLT-V72 in such a way that no persons can be injured if the
device mounting should break (e.g. as a result of a fatigue fracture).
3. Otherwise, it is essential to adopt corresponding safety measures.
4. Ensure that the installation environment is correct, as is not permitted to
result in an enclosed system because the cooling concept of the DLT-V72
requires fresh air. Without a supply of fresh cooling air, the DLT-V72 may
overheat and may be damaged beyond repair.
Specific information on vehicle mounting (forklifts, etc.)
1. Mount the DLT-V72 so that the driver's field of view remains clear and safe
driving operation is guaranteed.
2. During the mounting process, observe the requirements of the vehicle
manufacturer relating to attaching auxiliary devices and connecting
auxiliary consumers.
3. Observe all requirements relating to welding or drilling on support
components of the vehicle.