User's Manual

ManualsBrandsAdvantech ManualsElectronicsComputer

Safety Instructions

DLT-V4108 Industrial PC

Advantech-DLoG

Safety Instructions DLT-V4108, V01 PN2005410800

1 / 8

 Carefully read and comply with the

safety instructions.

 Carefully read the accompanying

“DLT-V4108 Quick Start Guide”

 Keep all documents for future

reference.

 You can find additional information in

the “DLT-V4108 Manual” at

www.advantech-dlog.com, Downloads

-> Products.

Contents

1. Intended use

2. Required qualification

3. Transport, storage

4. Commissioning

5. Handling, operation

6. Maintenance

7. Regulatory information

8. Technical customer support

Design elements in this safety

instructions

This symbol and the keywords indicate hazards

that pose a risk to life and limb:

DANGER / WARNING /

CAUTION

Personal injury.

DANGER: danger that immediately leads to

death or severe injury.

WARNING: danger that can lead to death or

severe injury.

CAUTION: danger that can lead to slight

injuries.

These tips warn you of possible property

damage:

NOTICE: Physical damage

Information about possible physical damage

Intended use

DLT-V4108 Industrial PC is a data

communication terminal for using in commercial

environments (e.g. logistics, warehouse,

manufacture site). Any other or additional

usage beyond this shall be deemed as

improper usage. The user/operator of DLT-

V4108 is solely responsible for any resulting

damage. This also applies to any unauthorized

modifications made to this device.

DLT-V4108 is intended to be used either with

the original Advantech-DLoG power cable or an

Advantech-DLoG certified external DC power

supply with 9 to 60 VDC and 5 A.

The maximum system operation temperature is

+50 °C.If need further assistance, please

contact Advantech-DLoG for further information.

Indented use includes the compliance with all

safety instructions and the compliance with the

approved environmental conditions and

specifications for this device.

DLT- V4108 Industrial PC:

 is not approved to be used in any EX

zone (potential explosion hazard), on

ships and railed vehicles.

 is not approved to be used in any life-

support system or critical safety system

where system malfunction can lead to

direct or indirect endangerment of

human life.

Summary of content (8 pages)

PAGE 1
Safety Instructions DLT-V4108 Industrial PC     Carefully read and comply with the safety instructions. Carefully read the accompanying “DLT-V4108 Quick Start Guide” Keep all documents for future reference. You can find additional information in the “DLT-V4108 Manual” at www.advantech-dlog.com, Downloads -> Products. Contents 1. 2. 3. 4. 5. 6. 7. 8.
PAGE 2
Safety Instructions DLT-V4108 Industrial PC Only use accessories that have been tested and approved by Advantech-DLoG for the respective DLT-V4108. Otherwise, any DLoG GmbH warranty for this device will be void.   CAUTION Replaceable Battery. The DLT-V4108 has an integrated uninterrupted power supply (UPS). The battery pack (lithium-ion technology) of the UPS is located inside of back cover and couldn’t be changed by user. RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
PAGE 3
Safety Instructions DLT-V4108 Industrial PC  Use protective material (nonflammable!) between the devices as a precaution. UPS battery pack safety notes WARNING The integrated UPS lithium-ion battery packs can ignite if the DLT-V4108 is handled or stored improperly (risk of fire), cause chemical burns or release toxic substances.       Use care when handing the DLTV4108. Do not damage the DLT-V4108; otherwise lithium-ion battery packs could be damaged.
PAGE 4
Safety Instructions DLT-V4108 Industrial PC on, the user is encouraged to try to correct the interference by one or more of the following measures:  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit  different from that to which the receiver is connected.  Consult the dealer or an experienced radio/TV technician for help. Wireless technology DLT-V4108 device is intended to transmit RF energy.
PAGE 5
Safety Instructions DLT-V4108 Industrial PC  the bracket breaks (e.g. because of a stress fracture). Alternatively please put appropriate safety measures in place (e.g. install a security cable in addition to the mounting bracket). Important information for electrical installation WARNING Electrical shock due to lack of disconnecting device. DLT-V4108 industrial PCs are not equipped with disconnecting devices that are accessible from the outside; they do not have switches.
PAGE 6
Safety Instructions DLT-V4108 Industrial PC Observe the following instructions when connecting/removing external devices.  Only use accessories that have been tested and approved by AdvantechDLoG for the respective DLT-V4108  DLT-V4108 may not be connected to power supply if external devices are being connected/ removed (not applicable for USB devices).
PAGE 7
Safety Instructions DLT-V4108 Industrial PC The legal warranty shall apply. It expires if customer performs measurement on the device which is only permitted to be performed by the manufacturer and it’s authorized Service Centers. Risk of accident due to unstable attachment of DLT-V4108. If the attachment of DLT-V4108 becomes loose and breaks during operation or movement, this can lead to severe accidents.
PAGE 8
Safety Instructions DLT-V4108 Industrial PC 8 Technical customer support Please contact your distributor, your sales representative or Advantech-DLoG’s customer service to receive technical support. Please have the following information available:       Product name Serial number Description of your peripheral attachments Description of your software (operating system, version, application software, etc.