User's Manual

Safety Instructions
DLT-V4108 Industrial PC
4 / 8
Safety Instructions DLT-V4108, V01 PN2005410800
Advantech-DLoG
on, the user is encouraged to try to correct
the interference by one or more of the
following measures:
 Reorient or relocate the receiving antenna.
 Increase the separation between the
equipment and receiver.
 Connect the equipment into an outlet on a
circuit
 different from that to which the receiver is
connected.
 Consult the dealer or an experienced
radio/TV technician for help.
Wireless technology
DLT-V4108 device is intended to transmit RF
energy. To protect humans against RF
exposure and to comply with country-specific
regulations:
 This equipment should operate with
minimum distance 20 cm between the
radiator & your body
 Make sure that the transmission power
and the radio frequency of DLT-V4108
comply with the regulations for the
respective country where the device is
deployed.
 Depending on the country-specific
regulations, the operating
company/importing company may be
required to ensure the settings of
wireless operation are compliant. The
regulatory authorities in the relevant
country can provide information on this.
 Observe the applicable regulations for
your deployment location/country with
regard to frequencies and the
maximum permissible transmitting
power. Responsibility for this lies with
the company operating DLT-V4108.
Any changes or modifications which are not
expressly approved by the party responsible for
the compliance can lead to the withdrawal of
the operating license and guarantee for this
device.
Electromagnetic radio frequency energy can
interfere with technical devices.
 Do not use DLT-V4108 near
pacemakers.
 Before using the device please obtain
information about the use of DLT-
V4108 within certain areas (e.g.
airports, hospitals, etc.) and also about
the respectively applicable regulations
and obtain an approval for the
operation of the device, if necessary.
Important information for mechanical
mounting
WARNING
Observe the manufacturer’s instructions for
the respective application site.
 Observe the manufacturer’s
instructions about the installation of
peripheral devices.
 This is particularly important when
welding or drilling supporting parts.
 Observe the manufacturer’s
instructions for connecting additional
loads, for instance, in conjunction with
an emergency shut-off switch.
Risk of accident due to unstable attachment
of DLT-V4108.
 When installing DLT-V4108, please
make sure that no one will be injured if