User's Manual

If user would like to run DVS-350 with 12 channel application, user should connect the 12
channel inputs to channel 1 to channel 12 with 10/8 fps per channel.
If user would like to run DVS-350 with 16 channel application, user should connect the 16
channel inputs to channel 1 to channel 16 with 7.5/6 fps per channel.
Also, user can set different 878A chip with different switch. For example, user can set the
chip1 to 1 input only, the chip2 to 3 inputs, the chip3 to 2 inputs, and the chip4 to 4 inputs.
Then, the channel 1 can run at 30/25 fps. The channel 2, 6 and 10 can run at 10/8 fps. The
channel 3 and 7 can run at 15/12.5 fps. The channel 4, 8, 12 and 16 can run at 7.5/6 fps. The
channel 5, 9, 11, 13, 14 and 15 will not accept any video signal with above setting. User can
set the video channel setting to meet the specific application situation.
For the DVS-350 series with Intel ULV Celeron® M 600MHz, user just can run it up to 8 video
inputs at 15/12.5fps.
Note: Above information are the characteristics of Conexant Fusion 878A video chip and
DVS-350 series. The actual frame rate and performance will depend on the video input
setting, compression codec, the CPU type, the DRAM capacity/speed, the video content
(Moving or still), the brightness and etc.