Product specifications

11-7
Features
www.advantech.com/products
Online Download
8
5
44
10
ICOM
9
Motion Control
8
ADAM-3000
7
cPCI
6
DA&C
ATM & AWS
FPM
3
TPC
2
IPPC
1
Software
11
eConnectivity
12
UNO
13
ADAM-4000
14
ADAM-5000
15
ADAM-6000
16
ADAM-8000
17
BAS
All product specifications are subject to change without notice Last updated : January 2005
EDG-4508+/4508R+
EDG-4516+/4516R+
NEW
Specifications
Hardware
 I/O Controller 16C954 or compatible (auto hardware flow control)
 Connector Type Network: RJ-45
Serial: RJ-48
Interface
 Network 10/100Base-T
 Serial RS-232/422/485
 Signals TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
Performance
 Speed 50 bps ~ 230.4 kbps
 Max. No. of Ports 256
Configuration
 Data Bits 5, 6, 7, 8
 Stop Bits 1, 1.5, 2
 Parity None, even, odd, space, mark
I/O Type: 4 DI & 4 DO
 Digital Input Dry contact
Logic level 0: close to GND
Logic level 1: open
 Digital Output Open collector to 30 V, 200 mA max. load
 OS Windows
®
98/NT/2000/XP
8-port RS-232/422/485 to Ethernet
Data Gateway with Front/Rear Wiring
16-port RS-232/422/485 to Ethernet
Data Gateway with Front/Rear Wiring
Power and Environment
 Power Requirements 90 ~ 260 V
AC
, 47 ~ 63 Hz(optional dual power supply)
 Operating Temperature 0 ~ 55° C (32 ~ 131° F)
 Surge Protection 15,000 V
ESD
Ordering Information
 EDG-4508+ 8-port RS-232/422/485 to Ethernet Data Gateway
(1 pc of 30 cm RJ-48 to male DB9 RS-232/422/485
cable included)
 EDG-4516+ 16-port RS-232/422/485 to Ethernet Data Gateway
(1 pc of 30 cm RJ-48 to male DB9 RS-232/422/485
cable included)
 EDG-4508R+ 8-port RS-232/422/485 to Ethernet Data Gateway with
Rear Wiring (1 pc of 30 cm RJ-48 to male DB9
RS-232/422/485 cable included)
 EDG-4516R+ 16-port RS-232/422/485 to Ethernet Data Gateway
with Rear Wiring (1 pc of 30 cm RJ-48 to male DB9
RS-232/422/485 cable included)
 OPT1A 1m RJ-48 to male DB9 RS-232/422/485 cable
 OPT1D 30cm RJ-48 to male DB9 RS-232/422/485 cable
Applications
 Industrial/Factory automation
 SCADA systems
 Telecommunications
 Automatic warehouse control
 Building automation
 Self-service banking systems
 Large scale retail systems
 Support local console, utility and remote Web configuration
 Support 8 DI/O channels for alarm/event control
 Optional dual power supply mechanism (EDG-4508+/4516+ only)
 Support advanced security mechanism to avoid unauthorized access
 Automatic connection recovery
 Auto-detect 10/100 Mbps Ethernet interface
 Status LEDs for all ports Tx/Rx, mode and power
 Windows native COM port compatible drivers
 Rear Wiring (EDG-4508R+ and EDG-4516R+)
Introduction
EDG-4508+ and EDG-4516+ are industrial-grade network-based serial device servers for connecting up to 8 or 16 RS-232/422/485 devices, such as CNCs, PLCs, scales and
scanners, directly to a TCP/IP network (Ethernet or Internet). Compared with similar products on the market, EDG-4508+ and EDG-4516+ has a low cost, but offer high performance
with dual CPUs.
EDG-4508+ and EDG-4516+ provides many advanced features for both local and remote configuration through a software utility, V.24 console and the Web. To allow extra control,
EDG-4508+ and EDG-4516+ have built-in 4 digital input and 4 digital output channels on their back side. To enhance their reliability as device servers, EDG-4508+ and EDG-4516+
supports a redundant power mechanism for future expansions.
Both EDG-4508+ and EDG-4516+ supports 10/100 Mbps Ethernet connections for higher bandwidth, lower traffic impact and more layout flexibility. With Tx/Rx LEDs for all ports
and LEDs for mode and power on the front panel; operation, administration and maintenance are simplified.
*In default, only one power supply is included.
EDG-4516R+ EDG-4516+
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: [phone]-Outside Local Area: [phone]-www.stevenengineering.com