User manual

Chapter 3 Configuration

3.1 Web Browser

EKI-2548I provides a convenient configuring way via web browser. You can follow the steps below to

access EKI-2548I.

EKI-2548I’s default IP is 192.168.1.1. Make sure your host PC and EKI-2548I are on the same logical

sub-network.

Warning Your host PC should be in the same VLAN setting with EKI-2548I, or the

management will not be configured.

Connect EKI-2548I to the Ethernet then your host PC could be configured via Ethernet. Or you can

directly connect EKI-2548I to your host PC with a straight-through or cross over Ethernet cable.

Before to use web management, install the industrial switch on the network and make sure that any one

of PCs on the network can connect with the industrial switch through the web browser. The industrial

switch default value of IP, subnet mask, username and password are as follows:

• IP Address: 192.168.1.1

• Subnet Mask: 255.255.255.0

• Default Gateway: 192.168.1.254

• User Name: admin

• Password: admin

Open Internet Explorer and type EKI-2548I’s IP in the Address field then press Enter to open the web

Figure 3.1-1 Type the address in the URL

Figure 3.1-2 Web Login Window

EKI-2548I_Manual_ed2 22