User manual

3.1.2 Port
Port setting includes Port Status, Port Statistics, Port Control, Port Mirroring, and Rate Control. Through
this interface, users can set the parameters and control the packet flow among the ports.
Port Status
Displays port status depending on user’s setting and the negotiation result.
• Port: Displays the port number.
•
Type:
Displays the media type of the port.
• Link: The status of linking—‘Up’ or ‘Down’.
• State: The state of the port can be set to ‘Enable’ or ‘Disable’ by users via the Port Control section.
When the state is disabled, the port will not transmit or receive any packet.
• Negotiation: Displays the current negotiation mode: Auto or Force.
• Speed Duplex: Displays port connection speed and duplex mode. “Config” means the speed and
duplex mode are configured by users. “Actual” means the current status of the port.
• Flow Control: Displays the flow control status including “Symmetric”, “Asymmetric” or “Disable” in
full mode. “Config” means the value is configured by users. “Actual” means that the value is the
current status of the port.
Figure 3.1-15 Port Status
EKI-2548I_Manual_ed2 36