User manual

Commands Level Description Example
qos policy
[weighted-fair|strict]
G
Select QOS policy scheduling switch(config)#qos policy weighted-fair
qos prioritytype
[port-based|cos-only|tos-only|cos-
first|tos-first]
G
Setting of QOS priority type switch(config)#qos prioritytype
qos priority portbased
[Port] [lowest|low|middle|high]
G
Configure Port-based Priority switch(config)#qos priority portbased 1 low
qos priority cos
[Priority][lowest|low|middle|high]
G
Configure COS Priority switch(config)#qos priority cos 0 middle
qos priority tos
[Priority][lowest|low|middle|high]
G
Configure TOS Priority switch(config)#qos priority tos 3 high
show qos
P
Displays the information of QoS
configuration
Switch#show qos
no qos
G
Disable QoS function switch(config)#no qos
3.2.10 IGMP Commands Set
Table 3.10: QOS Commands Set
Commands Level Description Example
igmp enable
G
Enable IGMP snooping function switch(config)#igmp enable
Igmp-query auto
G
Set IGMP query to auto mode switch(config)#Igmp-query auto
Igmp-query force
G
Set IGMP query to force mode switch(config)#Igmp-query force
show igmp configuration
P
Displays the details of an IGMP
configuration.
switch#show igmp configuration
show igmp multi
P
Displays the details of an IGMP
snooping entries.
switch#show igmp multi
no igmp
G
Disable IGMP snooping function switch(config)#no igmp
no igmp-query
G
Disable IGMP query switch#no igmp-query
3.2.11 Mac/Filter Table Commands Set
Table 3.11: Mac/Filter Table Commands Set
Commands Level Description Example
mac-address-table static hwaddr
[MAC] I
Configure MAC address table of
interface (static).
switch(config)#interface fastEthernet 2
switch(config-if)#mac-address-table static hwaddr
000012345678
mac-address-table filter hwaddr
[MAC]
G
Configure MAC address
table(filter)
switch(config)#mac-address-table filter hwaddr
000012348678
show mac-address-table P Show all MAC address table switch#show mac-address-table
show mac-address-table static P Show static MAC address table switch#show mac-address-table static
show mac-address-table filter P Show filter MAC address table. switch#show mac-address-table filter
no mac-address-table static hwaddr
[MAC] I
Remove an entry of MAC address
table of interface (static)
switch(config)#interface fastEthernet 2
switch(config-if)#no mac-address-table static
hwaddr 000012345678
no mac-address-table filter hwaddr
[MAC]
G
Remove an entry of MAC address
table (filter)
switch(config)#no mac-address-table filter hwaddr
000012348678
no mac-address-table G Remove dynamic entry of MAC switch(config)#no mac-address-table
45 Chapter3