User manual

Trap Configuration
A trap manager is a management station that receives the trap messages generated by the switch. If no
trap manager is defined, no traps will be issued. Create a trap manager by entering the IP address of the
station and a community string. To define a management station as a trap manager, assign an IP
address, enter the SNMP community strings, and select the SNMP trap version.
•
IP Address:
Enter the IP address of the trap manager.
•
Community:
Enter the community string.
•
Trap Version:
Select the SNMP trap version type—v1 or v2c.
•
Click
A
dd
.
•
To remove the community string, select the community string listed in the current managers field and
click
Remove
.
Figure 3.3-39 Trap Configuration interface
EKI-2748FI_Manual 88