User manual

3.3.4 Security
In this section, you can configure 802.1x and MAC address table.
802.1X/Radius Configuration
802.1x is an IEEE authentication specification which prevents the client from connecting to a wireless
access point or wired switch until it provides authority, like the user name and password that are verified
by an authentication server (such as RADIUS server).
802.1X/Radius - System Configuration
After enabling the IEEE 802.1X function, you can configure the parameters of this function.
•
IEEE 802.1x Protocol:
Enable or disable 802.1x protocol.
•
Radius Server IP:
Assign the RADIUS Server IP address.
•
Server Port:
Set the UDP destination port for authentication requests to the specified RADIUS Server.
•
Accounting Port:
Set the UDP destination port for accounting requests to the specified RADIUS
Server.
•
Shared Key:
Set an encryption key for using during authentication sessions with the specified
RADIUS server. This key must match the encryption key used on the RADIUS Server.
•
NAS, Identifier:
Set the identifier for the RADIUS client.
•
Click
Apply
.
Figure 3.3-45 802.1x/Radius System Configuration
97 Chapter3