User Manual SOM-4430
Copyright The documentation and the software included with this product are copyrighted 2008 by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to make improvements in the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reliable.
Warnings, Cautions and Notes Warning! Warnings indicate conditions, which if not observed, can cause personal injury! Caution! Cautions are included to help you avoid damaging hardware or losing data. Note! Notes provide optional additional information. Document Feedback To assist us in making improvements to this manual, we would welcome comments and constructive criticism. Please send all such - in writing to: support@advantech.
Safety Instructions 1. 2. 3. Read these safety instructions carefully. Keep this User Manual for later reference. Disconnect this equipment from any AC outlet before cleaning. Use a damp cloth. Do not use liquid or spray detergents for cleaning. 4. For plug-in equipment, the power outlet socket must be located near the equipment and must be easily accessible. 5. Keep this equipment away from humidity. 6. Put this equipment on a reliable surface during installation.
Wichtige Sicherheishinweise 1. 2. 3. Bitte lesen sie Sich diese Hinweise sorgfältig durch. Heben Sie diese Anleitung für den späteren Gebrauch auf. Vor jedem Reinigen ist das Gerät vom Stromnetz zu trennen. Verwenden Sie Keine Flüssig-oder Aerosolreiniger. Am besten dient ein angefeuchtetes Tuch zur Reinigung. 4. Die NetzanschluBsteckdose soll nahe dem Gerät angebracht und leicht zugänglich sein. 5. Das Gerät ist vor Feuchtigkeit zu schützen. 6.
Safety Precaution - Static Electricity Follow these simple precautions to protect yourself from harm and the products from damage. ! To avoid electrical shock, always disconnect the power from your PC chassis before you work on it. Don't touch any components on the CPU card or other cards while the PC is on. ! Disconnect power before making any configuration changes. The sudden rush of power as you connect a jumper or install a card may damage sensitive electronic components.
Contents Chapter Chapter 1 General Information ............................1 1.1 1.2 Introduction ............................................................................................... 2 Specifications ............................................................................................ 2 1.2.1 Standard System On Module Functions ....................................... 2 1.2.2 VGA/Flat Panel Interface .............................................................. 2 1.2.
Table B.3: Table B.4: Table B.5: Table B.6: BASE_ADDR defined on SB PCI CFG 65-64h ........ 22 BASE_ADDR defined on SB PCI CFG 67-66h ........ 22 BASE_ADDR defined on SB PCI CFG 69-68h ........ 22 BASE_ADDR defined on SB PCI CFG 6B-6Ah ....... 22 Appendix C System Assignments........................ 23 C.1 System I/O Ports..................................................................................... 24 Table C.1: System I/O Ports ......................................................
Chapter 1 1 General Information This chapter gives background information on the SOM-4430 CPU System on Module.
1.1 Introduction SOM-4430 is an embedded CPU module that fully complies with the SOM-ETX form factor standard. The new CPU module supports Advantech EVA-X4300 SOC (system on chip) which supports PCI and ISA interfaces. In a basic form factor of 95 mm x 114 mm, the SOM-4430 provides a scalable cost effective and easy to integrate solution for customers’ applications by utilizing a plug-in CPU module on an application-specific customer solution board.
Chapter 1 1.2.
SOM-4430 User Manual 4
Chapter 2 2 Mechanical Information This chapter gives mechanical and connector information on the SOM-4430 CPU System on Module.
2.1 Board Connector There are two connectors at the rear side of SOM-4430 for connecting to the carrier board. Figure 2.1 SOM-4430 locating connectors Pin Assignments for X1/2/3/4 connectors Please refer to SOM-ETX Design and Specification Guide.
Chapter 2 2.2 Board Mechanical Drawing 111.00 70.23 42.02 3.00 2.2.1 Front Side 92.50 84.21 59.41 27.03 2.50 114.00 80.52 24.43 0.00 0.00 Figure 2.2 SOM-4430 front side drawing 3.00 111.00 2.2.2 Rear Side 95.00 92.50 X2 70.40 70.40 X4 X1 28.80 24.60 X3 0.00 0.00 3.90 110.10 114.00 2.50 Figure 2.3 SOM-4430 rear side drawing 7 SOM-4430 User Manual Mechanical Information 95.00 89.
SOM-4430 User Manual 8
Chapter 3 3 BIOS Setup Information This chapter gives basic BIOS introduction and setup information on the SOM-4430 CPU System on Module.
3.1 BIOS Introduction The full-featured AwardBIOS 6.0 is provided by Advantech which delivers superior performance, and it’s many options and extensions let you customize your products to a wide range of designs and target markets. The modular, adaptable AwardBIOS 6.
Press to enter AwardBIOS’s CMOS Setup Utility, the Main Menu will appear on the screen. Use arrow keys to select among the items and press to accept or enter the sub-menu. 11 SOM-4430 User Manual BIOS Setup Information Standard CMOS Features This setup page includes all the items in standard compatible BIOS. Advanced BIOS Features This setup page includes all the items of Award BIOS’s enhanced features.
3.2.2 Standard CMOS Features Date The date format is , , , . Week From Sun to Sat, determined and display by BIOS only Month From Jan to Dec Day From 1 to 31 Year From 1999 through 2098 Time The time format is format, based on 24-hour time. IDE Channel 0 Master/Slave IDE HDD Auto-Detection Press "Enter" for automatic device detection. IDE Channel 1 Master/Slave IDE HDD Auto-Detection Press "Enter" for automatic device detection.
Chapter 3 3.2.3 Advanced BIOS Features 13 SOM-4430 User Manual BIOS Setup Information Hard Disk Boot Priority This item allows the user to select the boot sequence for system devices: HDD, SCSI, RAID. First / Second / Third / Other Boot Drive LS120 Select boot device priority by LS120. Hard Disk Select boot device priority by Hard Disk. CDROM Select boot device priority by CDROM. ZIP Select boot device priority by ZIP. USB-FDD Select boot device priority by USB-FDD.
3.2.4 Advanced Chipset Features Note! This “Advanced Chipset Features” option controls the configuration of the board’s chipset, this page varies depending on the chipset, for controlling chipset register settings and fine tuning system performance. It is strongly recommended only technical users make changes to the default settings. SMI712 VGA Setting [Press Enter] This item allows users to set VGA related features.
This “integrated Peripherals” option controls the configuration of the board’s chipset, and includes IDE, ATA, this page varies depending on the chipset. On-Chip Primary IDE This item enables chipset IDE device 1 of controller. Master PIO [Auto] This item allows users to adjust master IDE mode of type for modification purpose. BIOS default value is set to “Auto”. Slave PIO [Auto] This item allows users to adjust slave IDE mode of type for modification purpose. BIOS default value is set to “Auto”.
3.2.6 Load Optimized Defaults Note! Load Optimized Defaults loads the default system values directly from ROM. If the stored record created by the Setup program should ever become corrupted (and therefore unusable), these defaults will load automatically when you turn the SOM-4430 Series system on. 3.2.
To enable this feature, you should first go to the Advanced BIOS Features menu, choose the Security Option, and select either Setup or System, depending on which aspect you want password protected. Setup requires a password only to enter Setup. System requires the password either to enter Setup or to boot the system. A password may be at most 8 characters long. 17 SOM-4430 User Manual BIOS Setup Information To Establish Password 1.
3.2.8 Save & Exit Setup Note! Type “Y” will quit the BIOS Setup Utility and save user setup value to CMOS. Type “N” will return to BIOS Setup Utility. 3.2.9 Quit Without Saving Note! Type “Y” will quit the BIOS Setup Utility without saving to CMOS. Type “N” will return to BIOS Setup Utility.
Appendix A A System Assignments This appendix gives you the information about the watchdog timer programming on the SOM-4430 SOC System on Module.
A.1 Watchdog Timer Programming Table A.1: Watchdog Control: Watchdog Timer Control Register - Index 68h Bit Name P/W PWR Description 7 Reserved RO +V 3.3 Reserved 6 WE R/W +V 3.3 WDT1 Enable Control (Write bit6=1 to reload WDT1 counter) 0: Disable WDT1 (default) 1: Enable WDT1 5-0 Reserved RO +V 3.3 Reserved Table A.2: Watchdog Control: Watchdog Timer Control Register - Index 69h Bit Name P/W PWR Description 7-4 SSEL R/W +V 3.
Appendix B B Programming GPIO This appendix gives the illustration of the General Purpose Input and Output pin setting.
B.1 GPIO Register Table B.1: BASE_ADDR defined on SB PCI CFG 61-60h Bit Name P/W PWR Description 7-0 PORT0DT RW +V 5 PORT0 GPIO[7-0] data Table B.2: BASE_ADDR defined on SB PCI CFG 63-62h Bit Name P/W PWR Description 7-0 PORT1DT RW +V 5 PORT1 GPIO[15-8] data Table B.3: BASE_ADDR defined on SB PCI CFG 65-64h Bit Name P/W PWR Description 7-0 PORT2DT RW +V 5 PORT2 GPIO[23-16] data Table B.
Appendix C C System Assignments This appendix gives you the information about the system resource allocation on the SOM-4430 SOC System on Module.
C.1 System I/O Ports Table C.1: System I/O Ports Addr.
Appendix C System Assignments C.3 Interrupt Assignments Table C.
www.advantech.com Please verify specifications before quoting. This guide is intended for reference purposes only. All product specifications are subject to change without notice. No part of this publication may be reproduced in any form or by any means, electronic, photocopying, recording or otherwise, without prior written permission of the publisher. All brand and product names are trademarks or registered trademarks of their respective companies. © Advantech Co., Ltd.
