User manual

FPM-3060G Series User Manual 4
1.5 Connectors
The following connectors are on the bottom of the FPM-3060G Series:
VGA Port (DB15)
This DB-15 connector can be connected to the system via the external 15-
pin video signal cable.
RS-232 Touchscreen Connector (DB9) (with FPM-3060G-R)
This connector will only be present if a touchscreen is installed. It must
be connected to the RS-232 port of the PC. The touchscreen cable is
included with all orders that include the touchscreen option.
USB Touchscreen Connector (USB type B) (with FPM-3060G-U)
This connector will only be present if a touchscreen is installed. It must
be connected to the USB port of the PC. The touchscreen cable is
included with all orders that include the touchscreen option.
DC 12V Power In
This connector connects to the DC 12V Switching Power Supply.
Warning:
Before you connect a VGA cable between FPM-3060G and a PC, please
note the following issues.
1. If you have installed a operating system in the PC, make sure the ver-
tical frequency is within the acceptable range. (Refer to Appendix B)
2. If you have not installed a operating system, you have to adjust the
vertical frequency to fall within the range.