User manual

9 Chapter 2
2.1.2 Panel Mounting
Refer to figure 2.2 and follow the instructions below to install in a panel.
1. Place six panel-mounting brackets on FPM-3060G (2 on the top, 2
on the bottom, 1 on the left, and 1 on the right).
2. Fasten the six panel-mounting brackets with screws.
3. Mount FPM-3060G on the panel by the screws on the six panel-
mounted brackets. Please note that the panel thickness must be
below 6 mm.
Figure 2.2: Panel Mounting
2.1.3 Swing-ARM (VESA ARM standard compatible)
FPM-3060G has been designed with support for the VESA arm standard.
Refer to figure 2.5. Attach the mounting brackets on the rear side, then
attach the FPM-3060G onto the VESA ARM mount. The dimensions of
the mount hole is M5, and the mounting bracket is optional.
(P/N: FPM-3060VESA-MT)
Figure 2.3: Swing-ARM for the FPM-3060G series