FPM-3159 Series Industrial 15" LCD Display with 20.
Copyright Notice This document is copyrighted by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to make improvements to the products described in this manual at any time. Specifications are thus subject to change without notice. No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reliable.
Packing List Before installing your equipment, make sure that the following materials have been received: • FPM-3159 Series flat panel monitor • Accessory pack, including: - AC/DC adapter (optional) - Power chord (optional) - Video signal cable - Component bag - RS-232 cable - Screw bag - Touchscreen driver disks for Win95/98/NT (FPM-3159TV-T only) - FPM-3150 Series User's Manual If any of these items are missing or damaged, contact your distributor or sales representative immediately.
Safety Instructions 1. Read these safety instructions carefully. 2. Keep this User's Manual for later reference. 3. Disconnect this equipment from any AC outlet before cleaning. Use a damp cloth. Do not use liquid or spray detergents for cleaning. 4. For plug-in equipment, the power outlet socket must be located near the equipment and must be easily accessible. 5. Keep this equipment away from humidity. 6. Put this equipment on a reliable surface during installation.
Wichtige Sicherheishinweise 1. Bitte lesen sie Sich diese Hinweise sorgfältig durch. 2. Heben Sie diese Anleitung für den späteren Gebrauch auf. 3. Vor jedem Reinigen ist das Gerät vom Stromnetz zu trennen. Verwenden Sie Keine Flüssig-oder Aerosolreiniger. Am besten dient ein angefeuchtetes Tuch zur Reinigung. 4. Die NetzanschluBsteckdose soll nahe dem Gerät angebracht und leicht zugänglich sein. 5. Das Gerät ist vor Feuchtigkeit zu schützen. 6.
CHAPTER Introduction This chapter includes: • Introduction • Specifications • LCD Specification • Power Consumption • Connectors • Dimensions 1
1.1 Introduction By changing its appearance, the Chameleon varies according to surrounding environment. Just like this characteristic, the Advantech FPM-3159 provides varied touch patterns for different applications. The FPM-3159 is an industrial flat panel monitor with 15” TFT LCD display and 20.1” touchscreen. Outside the rim of the LCD display, we provide utilities which allow users to program the touch buttons easily. The customized touch panel makes the system perfectly suited for your control needs.
system. The front panel can be separated from the main system completely. Instead of using latches, the system adopts reliable screws to fix the front part and the back structure. By detaching the screws on each side, the front part, which contains legend, touchscreen, and aluminum bezel can be separated from the back. It is easy to maintain yet with a solid structure. 1.
1.3 LCD Specification • • • • • • • • • • • • Display type: XGA TFT LCD Display size: 15" Max. colors: 16.7M Full Color Max. resolution: 1024 x 768 Dot pitch: 0.297 x 0.297 mm View angle: 110 ° Luminance: 350 cd/m2 (4 CCFL) Storage temperature: -20 ~ 60 ° C Operating temperature: 0 ~ 50 ° C Backlight: 4 cold cathode fluorescent lamps (replaceable) Contrast Ratio: 250 : 1 (typ) Lamp Life Time (MTBF): 25,000 hrs. 1.
This connector will be present only if a touchscreen is installed. It must be connected to the RS-232 port of the PC. The touchscreen cable is included with all orders which include the touchscreen option. DC 12V Power In This connector will be connected to the DC 12V Switching Power Supply. Extended Cable Transmission A 5/10/20/30/50-meter VGA cable is provided for special applications. Another longer cable is also available. For more detailed information, please contact our dealers.
FPM-3159 Unit: mm 1.
CHAPTER 2 System Setup • Mounting the Monitor - Wall Mounting/Desktop Stand - Panel Mounting
2.1 Mounting the Monitor The FPM-3159 Series can be placed as you require. The versatility of the FPM-3159 mounts enable it to be mounted on your desk or anywhere else. 2.1.1 Wall Mounting Thanks to wall brackets, the FPM-3159 can be mounted directly to a wall. If you need to install the FPM-3159 in different ways, release the mounting brackets by detaching three screws on the rear side.
2.1.2 Desktop Mounting The desktop stand bracket is attached to the rear of the FPM3159 Series. Simply detach the small bracket at the top of the monitor by unscrewing the two screws. Invert the main bracket, and reattach the small bracket by tightening the two screws. The main bracket has now become the desktop stand bracket. Fig 2.
2.2 Panel Mounting for the FPM-3159 When installing the FPM-3159TV on a panel, use the 8 brackets in the accessory kit box. Please follow the instruction: 1. Take out the 8 brackets and assemble them. 2. Attach the 2 panhead screws, which placed in the sealed bag, onto the brackets’ side. Placing the spring into the 35mm screw, attach them to the bracket. 3. For top, bottom and right side of the monitor, mount each assembled bracket directly onto the monitor’s side hole.
4. For the bracket on the left side, slide the side cover backward by detaching the 2 screws. Figure 2-4: Detaching the bracket on the side 5. Reattach the side cover onto the monitor, fix the bracket as the steps mentioned above.
2.3 Pattern Legend for FPM-3159 FPM-3159 allows you to go quickly from concept to finished unit without an expensive and lengthy prototyping and revision process. You can easily create a customized key layout for your application needs, adding colors and graphics to meet your needs. The software programmable keys combined with the touch screen turns your monitor into a customized system controller panel. 2.3.1 Replaceable Pattern Legend FPM-3159 provides easy pattern legend replacing feature.
2.3.2 Programmable touchsurround utility We provide utility software which helps users configure the touchsurround function. Through 3 simple steps, the utility can define a certain area’s function. 1.Point out the upper left and the lower right point of the area that you want to perform certain function. 2.Decide the function that the area will perform. It could be either a text string or a command. 3. Decide the button release action.
14 FPM-3159 Series User's Manual
APPENDIX A Touchscreen Driver Installation • Introduction • Specification • Installation
A.1 Introduction The FPM-3159 Series’ optional touchscreen uses an advanced 8-wire resistive technology. It provides more accurate sensing capacity than other technologies. The touchscreen is specially designed for tough industrial environments, and has been approved to FCC Class A and Class B standards. A.2 Touchscreen Specification Electrical • Contact bounce: < 10 ms • Operating voltage: 5 V (typical) • Contact current: 20 mA (max.
Optical • Visible light transmission: 72% (typical) • Reflection: > 25% @ 550 nm Sensor board • Chemical strengthened glass meets “4H” hardness standard (Test condition: ASTM D3363-92A) Ball drop test • Touchscreen can withstand a 225 g steel ball dropped from a height of 660 mm, without breaking Environmental • Operating pressure: 30 ~ 45 grams for finger; 10 grams for stylus pen • Operating temperature: 0 ~ 50° C (humidity 20 ~ 90% RH) • Storage temperature: -25 ~ 70° C (humidity 20 ~ 95% RH) Appendix
A.3 Installation guide for “Touchsurround” utility The touchscreen in the FPM-3159 series comes with a driver for use with Windows 95, Windows 98, or Windows NT 4.0 operating systems. To facilitate installation of the touchscreen driver, you should read the instructions in this chapter carefully and refer to the touchsurround configuration user’s guide disk before installation. A.
Download the configuration 1. Insert the “Touchsurround” utility disk. 2. Go to MSDOS mode, change to c:\>touch\w9X(or NT) 3. Type C:\>touchini.exe /iA:/surround.txt Note: iA:/surround.txt stands for: Import from drive A , file surround.txt Upload the configuration 1. Insert the “Touchsurround” utility disk. 2. Go to MSDOS mode, change to: c:\>touch\w9X(or NT) 3. Type C:\>touchini.
20 FPM-3159 User's Manual
APPENDIX B Standard Timing Set Serial Data for Expansion
B.1 Setting serial data for expansion The fourteen kinds of timing below are already programmed in this module. The input synchronous signals are automatically recognized. SETTING SERIAL DATA FOR EXPANSION Preset Vsync Display Size No (Hz) Hsync (kHz) Sync H H V SYSTEM V CLK Pulse B.Porch Pulse B.Porch Logic Remarks (H) (CLK) (CLK) V,H (MHz) (H) 1 640x400 56.432 24.830 21.053 8 25 96 48 -,- *1 2 640x480 59.992 31.469 25.175 2 33 96 48 -,- vga 3 720x400 70.087 31.469 28.
Note 3:Adopt the evaluation, because the adjustment may not fit if the ratio differs or in the case if the display timing that was preset. The display color scale may differ between Sync on Green Input and others.
24 FPM-3159 Series User's Manual
APPENDIX OSD Selection • Introduction • Menu • Auto Adjust • Brightness • Clock • Position • Contrast • Color Level • Information • OSD Position • All Reset C
C.1 Introduction: The following pictures will appear on the screen when pressing the SEL key. Adjust each value by pushing the UP and DOWN keys. C.2 Menu: Each selected value is stored into LCD memory after SEL signal input or time out. The stored values are not affected if the power is turned off. But the selected value is not available in case a selected mode is changed before time out or power is turned off before time out.
C.4 Brightness Adjust the brightness level of backlight control as needed. C.5 Clock Adjust the video signal performance for LCD display, choose the H. Size and Clock phase for video signal control. H. Size means "horizontal display period adjust." Clock Phase means "CLK-phase adjust." C.6 Position You can choose the position for adjusting vertical and horizontal positions.
C.7 Contrast Adjust the white-level of the video signal control for contrast and schoose the sub-contrast with each video signal control. W,R,G,B: White-level of video signals asynchronous color and each color control. W: White-level of video signal synchronous color control. C.8 Color Level Adjust the color-level of the video signal for each color. W,R,G,B: Color level of video signals synchronous color and each color control. W: Color level of video signal synchronous color control.
C.9 Information It can show the video signal information, including the display multiscan function, Hsync and Vsync frequency. C.10 OSD Position Adjust the OSD position in the center by pressing the function and the displaypoistion of OSD will move. C.11 All Reset Choose reset for factory default values.
30 FPM-3159 Series User's Manual
