User manual

19 Appendix A
4. Check "Auto-detect Elo devices" if your touchmonitor serial cable
is connected to the computer and the serial cable supports hardware
handshaking. If you connect the serial cable later, do not check the
"auto-detect" box. Go to the next screen.
5. A list of all the serial ports that the system detected is shown. If you
checked the auto-detect box in the previous screen, and your touch-
monitor serial cable is attached to the computer, the COM port that
you selected should be checked in the list. If you agree with the
selection, click Next and proceed to the next screen.
6. The COM port you selected will be shown in the window of this
screen. This is your last opportunity to change your COM port
selection before the driver files are installed. Use the Back but-
ton(s) to change any of the selections you previously made. Click
"Next" to complete the installation of the driver files.
7. Depending on the revision of the driver you are installing, Win-
dows may advise you that the "software you are installing has not
passed Windows logo testing…" . Select "Continue Anyway" to
proceed with the installation. This message can be suppressed in
future installations by changing the selection in "Driver Signing
Options" at Control Panel>System>Hardware>Device Man-
ager>Driver Signing.