User manual

33 Appendix A
A.4 Installation of Capacitive Touchscreen Driver
When you install TouchWare driver software, you have two installation
options:
-Express Install
-Custom Install
Please refer to the CD-ROM TouchScreen-DRV\3M TouchWare Driver
for detailed touchscreen drivers installation procedure.
The Express option automatically installs the required TouchWare soft-
ware files, creates a TouchWare software program group, and places a
TouchWare software icon on the Windows desktop and control panel.
TouchWare software will also determine multiple monitor configurations
at this time.
Additionally, the Custom option allows you to specify the destination
folder and name the program group.
Note: If you have a Microsoft IntelliPoint or Kensington Mouseworks
PS/2 mouse, installing TouchWare software will disable the special
mouse functionality of these devices.
To install TouchWare software:
1. Make sure you have completed the appropriate hardware connec-
tions as described in the CD booklet or your controller reference
guide. The connections differ depending on your controller type.
2. Power on your system. Make sure no other applications are open.
3. Insert the CD or diskette #1 into your PC.
4. Browse to the Disk 1 folder and double-click the Setup.exe file.
5. Follow the onscreen instructions to begin the installation.
The system will prompt you to enter diskette #2 and #3 if neces-
sary.
6. When prompted to choose the installation type, select whether to
perform an Express Install or Custom Install.
If you choose Custom Install, you’ll be prompted to specify the
destination folder and name the program group.