FWA-3140 Rackmount Internet Security Platform with 4 Front LAN Ports/ Dual PCI Expansion Slots/ LCD Display Advantech Internet Security Platform
Copyright Notice This document is copyrighted, 2004. All rights are reserved. The original manufacturer reserves the right to make improvements to the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of the original manufacturer. Information provided in this manual is intended to be accurate and reliable.
Product warranty Advantech warrants to you, the original purchaser, that each of its products will be free from defects in materials and workmanship for two year from the date of purchase. This warranty does not apply to any products which have been repaired or altered by persons other than repair personnel authorized by Advantech, or which have been subject to misuse, abuse, accident or improper installation. Advantech assumes no liability under the terms of this warranty as a consequence of such events.
Packing List Before installation, ensure that the following materials have been received: • One FWA-3140 Internet Security Platform • One box of accessories • One warranty certificate • One CD-ROM for user manual (PDF file) If any of these items are missing or damaged, contact your distributor or sales representative immediately. Technical Support and Sales Assistance If you have any technical questions about the FWA-3140 or any other Advantech products, please visit our support website at: • http://www.
Contents 1. General Information....................................... 1 1.1 Introduction......................................................................... 2 1.2 Features................................................................................. 2 1 . 3 S p e c i f i c a t i on s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 1.4 Dimensions....................................................................
Figures Figure 1-1: FWA-3140 dimensions................................................................... 4 Figure 1-2: Outlook of FWA-3140......................................................................... 4 Figure 2-1: Front view of FWA-3140.......................................................... 7 Figure 2-2: Removing the cover............................................................. 7 Figure 2-3: Top view of FWA-3140..........................................................
1 General Information FWA-3140 User Manual --- Page 1
1.1 Introduction Conceived as a powerful rackmount Internet Security platform, the FWA-3140 was specifically designed for Internet secure connectivity. Designed with the Intel® Pentium® 4 processor, it provides high performance and meets the requirements of Internet security appliances. The system supports Compact Flash for OS and Internet security applications. This avoids service disruption caused by hard disk mechanical / magnetic failures.
• Drive Bay: 3.5”HDD x1 • Management: Console RS-232 x1 • Cooling: Fan (15 CFM) x2, Blower x1 • Miscellaneous: Power Switch, 2 LED indicators for Power/HDD, CompactFlash Socket x1, LCD Display Module x1 • Adapter Power Requirement: Input: ATX PS, AC 90 ~ 264 V @ 47 ~ 63 Hz, full range Output: 250W • Operating Environment: Operating: Temperature 0 ~ 40 °C (32 ~ 104 °F), Humidity 5 ~ 85 % Non-Operating: Temperature -20 ~ 75 °C (-4 ~ 167 °F), Humidity 5 ~ 95 % • Dimensions (W x H x D): 1U: 426 x 44.
1.4 Dimensions Figure 1-1: FWA-3140 dimensions.
1.5 Model List • FWA-3140 A: 1U rackmount Internet security platform, Dual 32-bit/33 MHz PCI expansion slots, LCD display module, Four 10/100 Fast Ethernet ports supporting one LAN Bypass function. • FWA-3140 B: 1U rackmount Internet security platform, Dual 32-bit/33 MHz PCI expansion slots, LCD display module, two 10/100 Fast Ethernet and two 10/100/1000 Gigabit Ethernet ports supporting one LAN Bypass function.
2 System Setup FWA-3140 User Manual --- Page 6
Setting up your FW-3140 requires only a screwdriver and a small amount of time. Before you begin, you should also gather together all of the device you plan to install, as well as the CPU, RAM, HDD, and etc. The front panel of FWA-3140 includes a LCD display module, four Ethernet ports, a RS-232 console port, and two LEDs where one is power LED and another is HDD LED. On the rear panel, there is a power switch located on the top right hand corner.
Power supply Two 15-CFM cooling fan 3.5” HDD Space Two PCI slot Figure 2-3: Top view of FWA-3140 2.2 Installing Central Processing Unit (CPU) 1. Locate the 478-pin CPU ZIF socket on the motherboard. And pull the Socket actuation lever to the 90-degree directly. 2. Position the CPU above the socket that its marked corner (golden cut edge on the CPU upper corner) matches the base of the socket lever. Insert the CPU into the socket. (Do not force the CPU into the socket.
1. 2. 3. 4. Figure 2-4: Installing Central Processing Unit steps 2.3 Installing Memory Module Please note that FSB 533 Pentium 4 processor will support DDR333/DDR266 memory module and FSB 400 Pentium 4 processor will only support DDR266 memory module. 1. Unlock a DIMM socket by. Align the notch of the DIMM memory module to match on the socket and insert the DIMM into the socket until the DIMM is properly seated.
2. Press the retaining clips inward to lock the DIMM memory module. Installing memory module is completed. 1. 2. Figure 2-5: Installing Memory Module steps 2.4 Installing Hard Disk Drive 1. Unscrew each side of the HDD supporting frame on the chassis and pull it out. 2. Put the HDD above the HDD supporting frame and position the screws accordingly. 3. Screw each side of the HDD supporting frame to fix on the chassis. 4. Connect the IDE cable included in the accessory box to the connector on the HDD.
1. 2. 3. 5. 4. Figure 2-6: Installing Hard Disk Drive steps 2.5 Installing Compact Flash 1. Position a CompactFlash disk accordingly in the CompactFlash disk socket and push it inward. Installing CompactFlash disk is completed.
1. Figure 2-7: Installing Compact Flash steps 2.6 Setting LAN Bypass function FWA-3140 provides LAN Bypass function showed as Figure 2-8. When system shuts down, LAN1-LAN2 will connect directly to avoid network broken.
The jump "J4" allows you to set LAN Bypass function. (See J4 pins assignment in APPENDIX A.1 NAME-3140 MOTHER BOARD) Pins 1-3: Monitor network mechanism with watchdog timer Pins 3-5: Turn off LAN Bypass N. C.: Turn on LAN Bypass Pins 2-4: Set LAN Bypass enable automatically when system shut down Pins 4-6: Set LAN Bypass enable / disable via BIOS 2 4 6 J4 : LAN Bypass Control 1 J4 3 5 1-3 :WATCH DOG (Default) 3-5 :LAN Bypass Off 2-4 :AUTO On (Default) 4-6 :GPIO Control N.C.
Figure 2-10: Setting LAN Bypass function from BIOS FWA-3140 User Manual --- Page 14
A Pin Assignments APPENDIX FWA-3140 User Manual --- Page 15
A.1 NAME-3140 Mother Board 1.
2.
