Specifications

FWA-3180 User Manual --- Page 7
Setting up your FW-3180 requires only a screwdriver and a small amount of time.
Before you begin, you should also gather together all of the device you plan to install,
as well as the CPU, RAM, HDD, and etc.
The front panel of FWA-3180 includes a LCD display module, eight LAN ports, a
RS-232 console port, and two LEDs where one is power LED and another is HDD LED.
On the rear panel, there is a power switch located on the top right hand corner.
Eight LAN
ports
LCD display module RS-232
Console
port
Power switch
Eight LAN
ports
LCD display module RS-232
Console
port
Power switch
Figure 2-1: Front view of FWA-3180
2.1 Removing the cover
There are screws which secure the cover to the chassis. They are along the sides,
near the top. Remove them, and then slide the cover to the rear of the chassis.
Figure 2-2: Removing the cover