Specifications

FWA-3180 User Manual --- Page 8
One PCI slot
3.5” HDD Space
Power supply
Two 15-CFM
cooling fan
One PCI slot
3.5” HDD Space
Power supply
Two 15-CFM
cooling fan
Figure 2-3: Top view of FWA-3180
2.2 Installing Central Processing Unit (CPU)
1. Locate the 478-pin CPU ZIF socket on the motherboard. And pull the Socket
actuation lever to the 90-degree directly.
2. Position the CPU above the socket that its marked corner (golden cut edge on
the CPU upper corner) matches the base of the socket lever. Insert the CPU into
the socket. (Do not force the CPU into the socket.) Then push down the socket
lever to secure the CPU.
3. Apply the thermal tape to provide better heat conduction between your CPU and
cooling fan. Position the cooling fan on top of the CPU. Align and snap the four
hooks of the retention mechanism to the holes on each corner of the module
base.
4. Make sure the CPU fan power connector is plugged to the motherboard fan
power connector, than installing CPU is completed.