User manual

11 GMB-910 User Manual
Chapter 1 Product Introduction
1.11.3 Installing a DDR2 DIMM
Note!  Recommended memory configuration.
Sockets
Mode DIMM1 DIMM2
Single-channel (1) Install -
(2) - Install
 CPU FSB/Memory frequency synchronization.
CPU FSB DDR 2 DIMM Type Memory Frequency
400 MHz DDR2 533 400 MHz
DDR2 400 400 MHz
Caution! Make sure to unplug the power supply before adding or removing
DIMMs or other system components. Failure to do so may cause severe
damage to both the motherboard and the components.
1. Unlock a DIMM socket by press-
ing the retaining clips outward
2. Align a DIMM on the socket such
that the notch on the DIMM
matches the break on the socket.
3. Firmly insert the DIMM into the
socket until the retaining clips
snap back in place and the DIMM.
Caution!  A DDR2 DIMM is keyed with a notch so that it fits in only one direc-
tion. DO NOT force a DIMM into a socket to avoid damaging the
DIMM.
 The DDR2 DIMM sockets do not support DDR DIMMs. DO NOT
install DDR DIMMs to the DDR2 DIMM socket.