User manual

GMB-910 User Manual 30
This item controls the speed at system registers repeated keystrokes.
Eight settings are 6, 8, 10, 12, 15, 20, 24 and 30.
– Typematic Delay (Msec)
This item sets the time interval for displaying the first and second characters.
Four delay rate options are 250, 500, 750 and 1000.
 Security Option [Setup]
 APIC Mode [Enabled]
This item allows user to enabled of disabled “Advanced Programmable Interrupt
Controller”. APIC is implemented in the motherboard and must be supported by
the operating system, and it extends the number of IRQ's available.
System System can not boot and can not access to Setup page if the cor-
rect password is not entered at the prompt.
Setup System will boot, but access to Setup if the correct password is not
entered at the prompt. (Default value)