User manual

11 APAX-5000 I/O Series User Manual
Chapter 1 Overview
6. If you need more than one APAX-5000 I/O module, stack another APAX-5002
backplane to the original APAX-5002 backplane.
7. Lock the stacked APAX-5002 backplane to the original APAX-5002 backplane
by the backplane locks.
Warning! When you assembly different backplanes together, remember to turn off
the power connected to the backplane. If not, the backplanes may be
damaged. Turn on the power again after you complete the assembly for
all backplanes.
Note! If you want to provide more power to the system, you can connect
another power supply wire to the power connections on the second
APAX-5002 backplane. (The wiring procedure is the same as step 1)