User manual

APAX-5000 I/O User Manual 30
Technical Specifications of APAX-5017
 Channels: 12 (Differential)
 Input Impedance: >10 MΩ (Voltage), 120Ω (Current)
 Input Type: V, mV, mA
 Voltage/Current Range:
±150mV,±500mV,±1V,±5V,±10V,±20mA,0~20mA,4~20 mA
 Configure Different Range for Each Channel: Yes
 Accuracy: ±0.1% or better (Voltage), ±0.2% or better (Current) at 25° C
 Resolution:
 Sampling Rate: 12 samples/second (total)
 CMR @ 50/60 Hz: 90 dB
 NMR @ 50/60 Hz: 67 dB
 Noise Suppression for Frequency: 50/60 Hz
 Span Drift: ±30 ppm/° C
 Zero Drift: ±6 μV/° C
 Input Characteristic Curve: According to IEC 61131-2
 Common Mode Voltage: up to 200 VDC
Protection
 Isolation: 2,500 VDC (Between channels and backplane bus)
 Over Voltage Protection: ±35 VDC
Environment
 Operating Temperature: -10 ~ 60° C (when mounted vertically)
 Storage Temperature: -40 ~ 70° C
 Relative Humidity: 5 ~ 95% (non-condensing)
General
 Dimensions (W x H x D): 30 x 139 x 100 mm
 Weight: 170 g
 Power Consumption: 4 W @ 24 VDC (typical)
Voltage
Range Resolution
±150 mV 16 bit
±500 mV 16 bit
±1 V 16 bit
±5 V 16 bit
±10 V 16 bit
Current
Range Resolution
±20 mA 15 bit
0 ~ 20 mA 14 bit
4 ~ 20 mA 14 bit