User manual

43 APAX-5000 I/O Series User Manual
Chapter 3 Digital Input
/
Output Modules
APAX-5040 Specifications
Digital Input
 Channels: 24
 Points per Common: 12
 Type: Sink/Source (Wet Contact)
 Input Voltage Rated Value: 24 VDC
– For "0" signal: -5 ~ 5 VDC
– For "1" signal: 15 ~ 30 VDC and -15 ~ -30 VDC
 Input Impedance: 5.4 kΩ
 Input Current: typical 4.4 mA (At signal "1")
 Input Filter: 3 ms
 Input Characteristic Curve: According to IEC 61131-2, type 1
Protection
 Isolation: 2,500 VDC (Between channels and backplane bus)
 Over Voltage Protection: ±70 VDC
Environment
 Operating Temperature: -10 ~ 60° C (when mounted vertically)
 Storage Temperature: -40 ~ 70° C
 Relative Humidity: 5 ~ 95% (non-condensing)
General
 Dimensions (W x H x D): 30 x 139 x 100 mm
 Weight: 160 g
 Power Consumption: 2 W @ 24 VDC (typical)
 Status Display: LED per channel
– On: Logic level “1”
– Off: Logic level “0”