Unit installation

INTRAC-305 SAFETY

Facilities exist at the Motor Drive Cabinet for the connection

of external emergency stop switches. It is highly

recommended that those fitted be of the latching type.

MECHANICAL

Mounting The INTRAC-305 must not be mounted so that it is supported

only by the front panel. A proper rack mounting kit must be

used. This may be either of the fixed mounting type or the

sliding rail type.

EMC

The unit is designed to meet the requirements of the EC EMC

Directive and conforms to the relevant standards for EMC

emissions and immunity.

Important To ensure that an INTRAC installation also complies with the

EMC Directive it is important to make all interconnections

between the INTRAC-305 and associated equipment using

good quality screened cables as recommended in the

appropriate sections of this manual.