Unit installation

INTRAC-305 INSTALLATION
© 2011 Advantech Wireless INTRAC-305 MANUAL - Issue 3.2 Page 71
6
Test Port 1 & 2 RS423
INTRAC
TM
305 Serial Port Connector
Remote Control PC
9 way D type
Socket
Signal Type
Signal Name
Signal Type
PC Connector
1
Passive
DCD
2
output
RXD
input
3
input
TXD
output
4
5
GND
GND
GND
6
Passive
DSR
7
8
Passive
CTS
9
N/C
N/C
Test Port 1 & 2 RS422
INTRAC
TM
305 Serial Port Connector
Remote Control PC
9 way D type
Socket
Signal Type
Signal Name
Signal Type
PC Connector
1
2
output
RXDB = RXD-
input
3
input
TXDB = TXD-
output
4
5
GND
6
output
RXDA = RXD+
input
7
input
TXDA = TXD+
output
8
9
The INTRAC-305 is wired as a DCE unit suitable for direct 1
to 1 connection to the 9-way serial port of a PC AT.
TXD and RXD data flow directions are standard (relative to
the DTE). Handshake lines are pulled to the ON condition.
The factory default setting for the three serial ports is RS423.
The set-up for RS422 is shown over page.