Intel® Dialogic® System Release 6.
Contents About This Publication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Applicability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Intended Audience . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . How to Use This Publication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents 8.3 8.4 9 Signaling Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Switching Boards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 9.1 9.2 9.3 9.4 9.5 9.6 System Release Documentation . . . . . . . . . . . . . . . .
About This Publication The following topics provide information about this publication: • Applicability. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 • Intended Audience . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 • How to Use This Publication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 • Related Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
• Chapter 5, “OA&M Software” describes the operation, administration, maintenance, and diagnostics supported in this release. • Chapter 6, “Programming Libraries” describes the programming libraries that are available in this release. • Chapter 7, “Demonstration Software” describes the demonstration software provided in this release. • Chapter 8, “Supported Hardware” provides a list of all the hardware supported in this release.
Release Overview 1. 1 This chapter provides a high-level overview of the products and features that are newly supported in Intel® Dialogic® System Release 6.1 CompactPCI* for Windows. Products and features that are newly supported are new since Intel® Dialogic® System Release 6.0 CompactPCI* Feature Pack 1 for Windows. System Release 6.
Release Highlights System Release 6.
• Centralized OA&M logging with Runtime Trace Facility (RTF) diagnostic tool System Release 6.
System Requirements 2. 2 This chapter describes the hardware and software system requirements for Intel® Dialogic® System Release 6.1 CompactPCI* for Windows: • Basic Hardware Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 • Basic Software Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 2.1 Basic Hardware Requirements The basic hardware requirements for System Release 6.
Traditional Chinese Version is a superset of Simplified Chinese Version and supports extra characters. System Release 6.1 cPCI for Windows does not support the Traditional Chinese Version of the operating system. • Compiler support for Developer Studio 6.0 and 7.0 Notes:1. Intel® Dialogic® drivers do not support Physical Address Extensions (PAE). Users using Windows 2003 with Service Pack 1 will have to disable PAE (which is enabled by default in Service Pack 1). 2.
New Features by Product 3. 3 This chapter describes the new features for various Intel NetStructure® and Intel® Dialogic® telephony products that are supported in Intel® Dialogic® System Release 6.1 CompactPCI* for Windows. These features are new since Intel® Dialogic® System Release 6.0 CompactPCI* Feature Pack 1 for Windows. • New Intel NetStructure DMV1200BTEC, DMV600BTEC and DMV4800BC and Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
These features are new since System Release 6.0 cPCI Feature Pack 1 for Windows. Note that the DM/V-B boards support all the same features as the DM/V-A boards including: Supports a variety of features at different channel densities depending on the media load selected. Refer to the DM3 Configuration Guide for more information about media loads and the board support.
• Group 1: Mix any combination of 4ESS (T1), 5ESS (T1), NTT (T1) NI2 (T1), DMS (T1),QSIGT1 (T1), QSIGE1 (E1), NET5 (E1), T1CC (T1 Clear Channel), CAS (T1) E1CC (E1 Clear Channel), and R2MF(E1) protocols on the same board. • Group 2: Mix any combination of DPNSS(E1) and DASS2 (E1) protocols on the same board. A-Law/mu-Law conversion This feature is only available on DM/V-B boards with network interfaces. Refer to the DM3 Configuration Guide.
Streaming to board This feature enables streaming to a network interface in real time, which is essential in applications such as text-to-speech and IP gateways. Several new functions have been added to the Voice library. For more information, refer to the Voice API Library Reference and Voice API Programming Guide. Streaming echo-cancelled data to the CT bus The ec_stream( ) and ec_reciottdata( ) functions now support streaming of echo cancelled data to the TDM bus.
Features Intel NetStructure DM/IP boards support the following new IP protocol features in this release. These features are new since System Release 6.0 cPCI Feature Pack 1 for Windows. For information about many additional new IP protocol features that are supported on both DM/IP and IPT boards, refer to the New Global Call Features for IP Technology section of this Release Guide.
Media LAN disconnection alarm Software alarm to notify IPML and Global Call (via GCAMS) applications if the board's media LAN connection is lost (due to cable disconnection, for example) and when it is restored. 3.4 New Features for Intel NetStructure DMN160TEC and DMT160TEC Products The Intel NetStructure® DMN160TEC and DMT160TEC digital telephony interface boards provide a high-density network interface on a CompactPCI* form factor.
E1/T1 CAS/R2 Technology Guide. DMN160TEC boards do not support CAS/R2 protocols. Note: The number of channels per trunk must remain the same as originally configured. This means you cannot dynamically change a span from T1 to E1 or vice-versa. This functionality is only provided at download.
New Features System Release 6.1 cPCI for Windows provides the following new feature on HDSI products. This feature is new since System Release 6.0 cPCI Feature Pack 1 for Windows. Station Interface Alarms This feature provides notification of problems with the communication link between a board and its associated Station Interface Box (SIB).
SS7CPM8 The SS7CPM8 is a SS7 signaling interface board that supports up to four SS7 links and provides eight T1/E1 interfaces. Signaling Interface Units (SIUs) Intel NetStructure Signaling Interface Units (SIUs) are SS7 server solutions that provide a convenient and cost-effective way to add SS7 connectivity to an existing multi-chassis system or to enable an application with the necessary protocols for mobile wireless or intelligent networks. System Release 6.
Features System Release 6.1 cPCI for Windows provides the following features for SS7 boards and SIUs: Global Call API support Supports the development of call control applications that use SS7 technology. See the Global Call SS7 Technology Guide for more information. Note: System Release 6.1 cPCI for Windows works in conjunction with the SS7 Development Package, which is not part of the System Release software. The SS7 Development package is available from the following URL: http://resource.intel.
Installation and Configuration 4. 4 This chapter provides information about the installation and configuration of Intel® Dialogic® System Release 6.1 CompactPCI* for Windows. This information is provided in the following sections:. • Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 • Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 4.
Global Call Protocols are now installed with the system release software In previous releases, the Global Call Protocols had to be installed separately from the system release software. Now the Global Call Protocol Release is integrated with the system release installation. No additional steps are required to install Global Call. Backup of configuration data from some previous releases is supported. If you have a previous Intel Dialogic System Release installed on your computer (System Release 5.1, 6.
Detection of unsupported boards If an unsupported board (i.e., a board that is not supported in System Release 6.1 cPCI for Windows) is detected by this release, you will be notified that the board is unsupported by the release via a log file (rtf*.txt) in the log directory and the Windows Event log. System Release 6.1 cPCI for Windows will not prevent you from installing an unsupported board. For information about installing and uninstalling System Release 6.
dependent parameter (CDP) file variants to trunks on boards that are PDK capable, providing the trunks have been configured for either the CAS or R2MF protocol. This property sheet includes the following parameters: • PDKTrunk 0 = allows you to assign the same CDP file variants to all trunks on a board. This parameter only applies if all of the trunks on a board are configured for the CAS or R2MF protocols. • PDKTrunk 1 to PDKTrunk 16 = allows you to assign CDP file variants on a trunk- by-trunk basis.
OA&M Software 5. 5 This chapter describes the OA&M (operation, administration and maintenance) software features that are supported in Intel® Dialogic® System Release 6.1 CompactPCI* for Windows. • Administration Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 • Diagnostics Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 5.
• Intel NetStructure® MPCHC5085/MPCBL5524A1C (Dual CPU) with up to a maximum of 4 GB RAM • Intel NetStructure® MPCHC5085/MPCBL5524A1D (Single CPU) with up to a maximum of 4 GB RAM • Intel NetStructure® MPCHC5091/ZT5524A-1A • Intel NetStructure® MPCHC5091/ZT5524A-1B • Intel NetStructure® MPCHC5091/MPCBL5524A1C • Intel NetStructure® MPCHC5091/MPCBL5524A1D • Intel NetStructure® ZT5085/MPCBL5525 or MPCHC5085/MPCBL5525 • Intel NetStructure® MPCHC5091/MPCBL5525 Note: For information about installing the Hot Sw
• Intel NetStructure® MPCHC5085/MPCBL5524A1D (Single CPU) with up to a maximum of 4 GB RAM Note: For information about installing RH (HA SDK), refer to the Pigeon Point Systems Hot Swap Kit User Guide, which is a PDF file located in the HSK directory with the System Release 6.1 cPCI for Windows software. For information about using RH software, refer to the Software Installation Guide, Administration Guide, and High Availability Demo Guide.
runtime libraries that are supported by System Release 6.1 cPCI for Windows. Support for the RTF tool is as follows: • Rtftool command is used to stop/start the RTF tool’s tracing capabilities • provides centralized logging for key OA&M components (OAMSYSLOG)and IP libraries • run the RTF tool in preservation mode.
Intel® Telecom Subsystem Summary Tool (its_sysinfo) System Release 6.1 cPCI for Windows introduces a new version of the Intel Telecom Subsystem Summary Tool (its_sysinfo). The its_sysinfo tool collects data from the system on which you execute it and provides you with information about the system environment: the operating system, computer architecture, Intel Dialogic System Release software, and operational logs.
Programming Libraries 6. 6 This chapter describes the features of the programming libraries that are supported in Intel® Dialogic® System Release 6.1 CompactPCI* for Windows. • Audio Conferencing (DCB) API Library . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 • Continuous Speech Processing (CSP) API Library . . . . . . . . . . . . . . . . . . . . . 31 • Fax API Library . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.2 Continuous Speech Processing (CSP) API Library The continuous speech processing (CSP) API library supports development of host-based automatic speech recognition (ASR) applications. CSP provides many features such as high-performance echo cancellation, voice energy detection, barge-in, voice event signaling, pre-speech buffering, and full-duplex operation. The CSP software includes library functions, device drivers, firmware, and demonstration programs.
New Features System Release 6.1 cPCI for Windows supports the following new Global Call features. These features are new since System Release 6.0 cPCI Feature Pack 1 for Windows. Note: The Global Call Protocols Package is now integrated with the System Release 6.1 cPCI for Windows software installation. Previously, this was a separate, installable package.
• Uzbekistan R2 For further information about these protocols, see the Global Call CDP Configuration Guide. Querying ABCD bits The Direct Signaling protocol now provides the ability to retrieve the current state of the ABCD signaling bit values by using the gc_Extension( ) function. For further information, see the Global Call CDP Configuration Guide.
System Release 6.1 cPCI for Windows also supports the following new features that are specific to the H.323 protocol only: Optional H.245 channel in H.323 fastStart connection mode By indicating that the H.245 channel is not essential, an application can accelerate the call establishment process by allowing completion without waiting for the H.245 channel to be established. H.
Support for TCP and UDP transport protocols The Global Call IP call control library can be configured to accept incoming messages that use the TCP transport protocol rather than UDP. When TCP support is enabled, the library can be configured for which transport protocol to use as the default for SIP requests, and this default transport protocol can be overridden by the application on a message-by-message basis.
Support for QSIG NCAS The ability to make (outbound) and receive (inbound) Non-Call Associated Signaling (NCAS) calls is supported for the QSIG protocol (E1 or T1) on the Intel NetStructure® DMV1200BTEC, DM/V960A-4T1-cPCI and DM/V1200A-4E1-cPCI boards. Note: The feature is only supported on media loads that use the QSIG T1 or E1 protocol; for example, ml2_qs2_qsige1. See the Global Call ISDN Technology Guide for more information. 2B channel transfer 2B Channel Transfer (2BCT) is now supported.
use this library for application development. VoIP applications that use the Global Call library for call control will have limited need to use the IP Media Library directly. Note: IP Media library functionality is documented in the IP Media Library API Library Reference and the IP Media Library API Programming Guide. Features System Release 6.1 cPCI for Windows provides the following new IP Media API Library features. These features are new since System Release 6.0 cPCI Feature Pack 1 for Windows.
The HDSI board can support up to 120 stations with tone detection and generation, and FSK Caller ID transmission. Note: Refer to the MSI API Library Reference and the MSI API Programming Guide for more information. New Features The following new MSI API library features have been implemented in System Release 6.1 cPCI for Windows. These features are new since System Release 6.0 cPCI Feature Pack 1 for Windows.
6.8 Voice API Library The Voice API library provides an interface for developing a wide range of call processing applications such as voice messaging, interactive voice response, telemarketing/call center, operator services, and more. Features include tone signaling, global tone detection and generation, call progress analysis, and a variety of voice encoding algorithms selectable on a channel-by-channel basis.
Enhancement to dx_reciottdata( ) Two new modes have been added. • Voice activity detector (VAD) with event notification (RM_VADNOTIFY). • Initial silence compression (RM_ISCR) Enhancements to SIT Templates Improvements include the following: • Broader default SIT sequence definitions to allow greater coverage for SIT sequences detected in the field.
Demonstration Software 7. 7 This chapter describes the demonstration (demo) programs that are provided in Intel® Dialogic® System Release 6.1 CompactPCI* for Windows. Demo programs are provided to demonstrate the functionality and features of Intel® telephony products and serve as examples of application programming using Intel® Dialogic® API libraries. All demo programs are supplied as source code which users may modify to explore other capabilities of the products.
CSP Demonstration Programs Two Continuous Speech Processing (CSP) demonstration programs continue to be supported in System Release 6.1 cPCI for Windows. These demo programs are located in the \demos\speechprocessing directory under INTEL_DIALOGIC_DIR (the environment variable for the directory in which the system release software was installed). The CSPAuto and CSPLive demo programs cover the functionality of the cspdemo program which is no longer available.
• Event Service API Library • Standard Runtime API Library Note: The rgademo and pfmdemo programs must be run simultaneously. rhmanager5085 This demo demonstrates how to integrate basic hot swap and redundant host (RH) High Availability architectures into systems and applications that are developed with Intel® Dialogic® software. The demo uses the RH APIs from Pigeon Point Systems* for the ZT5085 chassis as well as the NCM API.
Supported Hardware 8. 8 This chapter describes the boards supported in Intel® Dialogic® System Release 6.1 CompactPCI* for Windows. The boards are organized into the following categories: • Media Processing - Combined Media Boards . . . . . . . . . . . . . . . . . . . . . . . . . 44 • Media Processing - Single Media Boards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 • Signaling Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.2 Media Processing - Single Media Boards The Media Processing Single Media Boards consist of the following subcategories: • Fax boards Fax Boards • DM/F300-cPCI Voice Boards • DM/V1200-4E1-cPCI • DM/V960-4T1-cPCI • DMV/600-4E1-cPCI • DM/V480-4T1-cPCI 8.
• DM/IP601-cPCI-100BT • IPT10000C • IPT6720C • IPT4800C • IPT2400C • IPT1200C SS7 Boards • SS7HDCS8 • SS7HDCD16 • SS7HDCQ16 • SS7CPM8 Signaling Servers (SS7 Signaling Interface Units [SIUs]) • SS7G22 (in SIU Mode) • SS7G21 (in SIU Mode) • SIU520 • SIU231 • SIU131 8.4 Switching Boards The Switching Boards consist of the following subcategories: • Station Interface Boards Station Interface Boards • HDSI/1200-cPCI • HDSI/960-cPCI • HSDI/720-cPCI • HDSI/480-cPCI System Release 6.
Documentation 9. 9 This chapter lists all of the documents that are included as part of Intel® Dialogic® System Release 6.1 CompactPCI* for Windows. The documentation is divided into the following categories: • System Release Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 • Installation and Configuration Documentation . . . . . . . . . . . . . . . . . . . . . . . . . 47 • OA&M Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
• SNMP Agent Software for Windows Administration Guide • Intel Dialogic System Software Diagnostics Guide • Board Management API Library Reference • Event Service API for Windows Programming Guide • Event Service API for Windows Library Reference • Native Configuration Manager API for Windows Programming Guide • Native Configuration Manager API for Windows Library Reference 9.
Modular Station Interface • Modular Station Interface API Programming Guide • Modular Station Interface API Library Reference Standard Runtime Library • Standard Runtime Library API for Windows Programming Guide • Standard Runtime Library API Library Reference Voice • Voice API Programming Guide • Voice API Library Reference 9.
INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL® PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT.
