Specifications

1. Hardware Configuration
1.1 Introduction
The MIC-3359 is a 6U 8HP CompactPCI
®
SBC ideal for mission critical, demanding
industrial or military applications which require high performance as well as
endurance in harsh operating environments.
The MIC-3359 CompactPCI
®
CPU board is optimized for Intel
®
845GV chipset. It
supports both the Intel Desktop Celeron
®
and Pentium
®
4 processor up to 2.8 GHz,
and the mobile Pentium® 4 -M processor. The VGA is integrated in the Intel
®
845GV
chipset, and there are two DDR DIMM slots which can support system memory up to
2GB. The MIC-3359 uses the Intel 82562ET for 10/100 Mb Fast Ethernet, with an
option for the Intel
®
82551ER for 10/100 Mb Fast Ethernet which is pin-to-pin
compatible with the Intel
®
82540EM for Giga Ethernet. The Pericom PI7C8150MA MHz
PCI-to-PCI Bridge is designed for bus expansions, programmable data transfer rate
control, and frequency conversions.
To achieve the most cost effective combination for entry-level CT applications or entry
to mid-level industrial applications, you can use a MIC-3041L enclosure with a
MIC-3359 6U CPCI board and Intel Pentium IV processor without a rear I/O transition
board. This gives the best performance-price balance and produces the most
cost-effective solution.
High Performance Intel
®
Pentium
®
4 Processor-M, Intel
®
Desktop Pentium
®
4 Processor, and Celeron
®
Processor
The MIC-3359 supports the Intel
®
Pentium
®
4 processor-M 1.7 GHz and 2.2 GHz, the
Desktop Pentium
®
4 Processor, and the Celeron
®
Processor with either u-FCPGA
package or u-FCBGA package. Both Intel
®
Pentium
®
processor-M and Intel
®
Pentium
®
processor have on-chip 512 KB L2 cache providing high performance. The Intel
®
Celeron
®
processor has an on-chip 256KB L2 cache providing high performance. With
the support of a 400 MHz and 533 MHz front-side bus, the MIC-3359 can fulfill
customer’s expectations of price-performance computing capability.
MIC-3359 User Manual --- Page 2