Specifications

Quick Power On Self Test
This category shortens the Power On Self Test (POST) after you power on the
computer. If this is set to Enabled, BIOS will shorten or skip some check items during
POST.
Default Enabled Enable quick POST
Disabled Normal POST
First/Second/Third Boot Device and Boot Other Device
The BIOS attempts to load the operating system from the devices in the sequence
selected in these items. The settings are Floppy, LS120, HDD-0, SCSI, CDROM,
HDD-1, HDD-2, HDD-3, ZIP100, USB-FDD, USB-ZIP, USB-CDROM, USB-HDD, LAN
and Disabled.
Default First boot device CDROM
Second boot device HDD-0
Third boot device HDD-1
NOTE: When you boot by USB CD-ROM, please install WinXP with SP1 or Win 2000
with SP3.
Boot Up NumLock Status
Default On Keypad: numeric keys
Off Keypad: arrow keys
Gate A20 Option
MIC-3359 User Manual --- Page 19
Default Fast
The A20 signal is controlled by port 92 or chipset specific
method.
Normal
The A20 signal is controlled by keyboard controller or
chipset hardware.