Specifications

Typematic Rate Setting
Key strokes repeat at a rate determined by the keyboard controller. When enabled,
the typematic rate and typematic delay can be selected. The settings are:
Enabled/Disabled. The default setting is Disabled.
Typematic Rate (Chars/Sec)
Set the number of times a second to repeat a key stroke when you hold the key down.
The settings are: 6, 8, 10, 12, 15, 20, 24, 30.
Typematic Delay (Msec)
Sets the delay time after the key is held down before it begins to repeat the keystroke.
The settings are: 250, 500, 750, 1000.
Security Option
This category allows you to limit access to the system and/or to Setup.
Default Setup
The system will boot, but access to Setup will be denied if
the correct password is not entered at the prompt.
System
The system will not boot and access to Setup will be denied
if the correct password is not entered at the prompt.
APIC Mode (Advanced Programmable Interrupt Controller)
Default is Enabled.
MPS Version Control For OS
The options include 1.1 and 1.4. The default setting is 1.4
MIC-3359 User Manual --- Page 20