Installation guide
Table Of Contents
- About This Publication
- Document Revision History
- 1. Post-Release Developments
- 1.1 Service Update for Dialogic® System Release 6.1 CompactPCI for Windows®
- 1.2 PDK Support for Automatic Answer and Reject of Inbound Calls
- 1.3 Status Monitor Tool Support for 16 Span Boards
- 1.4 Improvement to Call Progress Analysis
- 1.5 Media Load Support for the Dialogic® DM/V1200A- 4E1-cPCI Board
- 1.6 Handling non-2xx Responses to T.38 Switch
- 1.7 Important Notice about System Release Update Installation
- 1.8 Media LAN Disconnection Alarm Notification for Dialogic® DM/IP Boards
- 1.9 Support for SFTP in Dialogic® Global Call SS7 Call Control Library
- 1.10 New Media Loads for Dialogic® DM/V4800BC Media Boards Using Special Coders
- 1.11 File Management Enhancements for DebugAngel Tool
- 1.12 File Management Enhancements for PDK Trace Tool
- 1.13 Configuring SIP Stack Parameters with Global Call
- 1.14 Disabling Automatic re-INVITE Message when Switching between Fax and Audio
- 1.15 IP Multicast Client Support
- 1.16 Troubleshooting Information for RTF Logs
- 1.17 Remote Diagnostics Package
- 1.18 Enhanced Diagnostics Tools
- 1.19 New QoS Alarms for RTCP and RTP Inactivity
- 1.20 New Operating System Support
- 1.21 Support for Compute Platforms
- 1.22 New Parameter for Adjusting Silence Threshold on Dialogic® DM3 Boards
- 1.23 File Management Enhancements for ISDNtrace Tool
- 1.24 New Media Loads for Dialogic® DM/V2400A-cPCI and DM/V4800BC Media Boards
- 1.25 Modified Alarm Events for Media LAN Disconnect
- 1.26 Enhancement to its_sysinfo Tool
- 1.27 Modify an Existing SIP Call Using re-INVITE for Dialogic® IPT Boards
- 1.28 PDK Log File Detection
- 1.29 Media Channel Reset Capability (Stuck IP Media Channel Recovery)
- 1.30 Dialogic® Global Call API Access to New H.323/Q.931 Message IEs
- 1.31 On-Demand Full Reset of Dialogic® DM3 Boards
- 1.32 New Dialogic® Diagnostics Management Console
- 1.33 New Runtime Trace Facility (RTF) Manager
- 1.34 Support for Reporting Billing Type
- 1.35 Runtime Control of Double Answer for R2MF
- 1.36 Additional Supported Operating System Security Updates
- 1.37 Media Channel Reset Capability (Stuck Channel Recovery)
- 1.38 Notification of Layer 1 Alarm Events on Dialogic® SS7 Boards
- 1.39 Dialogic® Global Call Support for Time Slots on Dialogic® SS7 Boards Running in DTI Mode
- 2. Release Issues
- 3. Documentation Updates
- 3.1 System Release Documentation Updates
- 3.2 Installation and Configuration Documentation Updates
- 3.2.1 Dialogic® System Release 6.1 CompactPCI for Windows® Software Installation Guide
- 3.2.2 Dialogic® DM3 Architecture for CompactPCI on Windows® Configuration Guide
- 3.2.3 Dialogic® IPT Series on Windows® Configuration Guide
- 3.2.4 Dialogic® Global Call Country Dependent Parameters (CDP) for PDK Protocols Configuration Guide
- 3.3 OA&M Documentation Updates
- 3.3.1 Dialogic® System Release 6.1 CompactPCI for Windows® Administration Guide
- 3.3.2 Dialogic® SNMP Agent Software for Windows® Administration Guide
- 3.3.3 Dialogic® System Software Diagnostics Guide
- 3.3.4 Dialogic® Board Management API Library Reference
- 3.3.5 Dialogic® Event Service API Programming Guide
- 3.3.6 Dialogic® Event Service API Library Reference
- 3.3.7 Dialogic® Native Configuration Manager API Programming Guide
- 3.3.8 Dialogic® Native Configuration Manager API Library Reference
- 3.4 Programming Libraries Documentation Updates
- 3.4.1 Dialogic® Audio Conferencing API Programming Guide
- 3.4.2 Dialogic® Audio Conferencing API Library Reference
- 3.4.3 Dialogic® Continuous Speech Processing API Programming Guide
- 3.4.4 Dialogic® Continuous Speech Processing API Library Reference
- 3.4.5 Dialogic® Digital Network Interface Software Reference
- 3.4.6 Dialogic® Fax Software Reference
- 3.4.7 Dialogic® Global Call API Programming Guide
- 3.4.8 Dialogic® Global Call API Library Reference
- 3.4.9 Dialogic® Global Call E1/T1 CAS/R2 Technology Guide
- 3.4.10 Dialogic® Global Call IP Technology Guide
- 3.4.11 Dialogic® Global Call ISDN Technology Guide
- 3.4.12 Dialogic® Global Call SS7 Technology Guide
- 3.4.13 Dialogic® IP Media Library API Programming Guide
- 3.4.14 Dialogic® IP Media Library API Library Reference
- 3.4.15 Dialogic® Modular Station Interface API Programming Guide
- 3.4.16 Dialogic® Modular Station Interface API Library Reference
- 3.4.17 Dialogic® Standard Runtime Library API Programming Guide
- 3.4.18 Dialogic® Standard Runtime Library API Library Reference
- 3.4.19 Dialogic® Voice API Programming Guide
- 3.4.20 Dialogic® Voice API Library Reference
- 3.5 Demonstration Software Documentation Updates
- 3.5.1 Dialogic® Continuous Speech Processing API Demo Guide
- 3.5.2 Dialogic® Global Call API Demo Guide
- 3.5.3 Dialogic® High Availability for Windows® Demo Guide
- 3.5.4 Dialogic® IP Gateway (Global Call) Demo Guide
- 3.5.5 Dialogic® IP Media Server (Global Call) Demo Guide
- 3.5.6 Dialogic® IP Media Gateway (IPML) Demo Guide
Dialogic
®
System Release 6.1 CompactPCI for Windows
®
Release Update 53
The new parameter IDs are added for the existing IPSET_CONFIG set ID as shown in the
following table.
By default, SIP re-INVITE messages upon media switch are sent automatically. The user
application has to specifically disable the transmission of the re-INVITE by using the
IPSET_CONFIG parameters. Typically, the automatic re-INVITE messages would be
disabled on one side user application only, namely a fax server type of application that
receives faxes.
The user application has to know whether to use this functionality depending on how the
application is to be used. This is usually done at the start of an application. If the
automatic re-INVITE messages are disabled on two applications in a back-to-back test,
the switch from fax to audio will never occur, because neither side will send out a re-
INVITE message to the other to renegotiate new media (audio) when a fax session ends.
The automatic re-INVITE messages can be disabled/enabled on a board, line, or call
reference number (CRN) device basis. Code examples are shown below.
1.14.2 Sample Code
Disabling Transmission of Automatic re-INVITE on a Board Device
DisableFToAReinvite()
{
LINEDEV linedevbp;
long request_id = 0;
GC_PARM_BLK *target_datap = NULL;
if (gc_OpenEx(&linedevbp,":N_iptB1:P_IP",EV_SYNC, NULL) != GC_SUCCESS)
{
//print error
return(FALSE);
}
gc_util_insert_parm_val (&target_datap, IPSET_CONFIG,
IPPARM_SIP_FAXTOAUDIO_AUTO_REINVITE_DISABLE,
sizeof (int), IP_MANUAL_MODE);
Set ID Parameter ID Set Send Retrieve
SIP/
H.323
IPSET_
CONFIG
IPPARM_SIP_FAXTOAUDIO_AUTO_REINVITE_
DISABLE
gc_SetConfigData( )
gc_SetUserInfo( )
--- --- SIP
only
IPPARM_SIP_FAXTOAUDIO_AUTO_REINVITE_
ENABLE
gc_SetConfigData( )
gc_SetUserInfo( )
--- --- SIP
only
IPPARM_SIP_AUDIOTOFAX_AUTO_REINVITE_
DISABLE
gc_SetConfigData( )
gc_SetUserInfo( )
--- --- SIP
only
IPPARM_SIP_AUDIOTOFAX_AUTO_REINVITE_
ENABLE
gc_SetConfigData( )
gc_SetUserInfo( )
--- --- SIP
only