User manual

21 Chapter 2
Figure 2.3: Device Setting Dialog Box
After your card is properly installed and configured, you can click the
‘Test’ button to test your hardware by using the testing utility we sup-
plied. For more detailed information, please refer to Chapter 2 of the
Device Drivers Manual.
You can also find rich examples on the CD-ROM to speed up your pro-
gramming.
Note: You can select the output voltage range. When
selecting voltage source as Internal, users
have three options for the output voltage
ranges and current ranges: -10 ~ 10 V, 0~20
mA and 4~20 mA.
Note: As we have noted, the device name “000:MIC-
3723 BoardID=0 I/O=bcc0H” begins with a
device number “000”, which is specifically
assigned to each card. The device number is
passed to the driver to specify which device
you wish to control.