User manual

Figure 5.17 North Bridge Configuration
5.5.2 South Bridge
Users can set up all parameters related to the PCH function in the South Bridge page.
Also, users can configure (to enable or disable) eight USB 2.0 channels supported on
the MIC-5332 in this page.
Feature Default Description
Name
Display
only
Stepping
Display
only
PCH Compatibility RID Disabled
Support for PCH
Compatibility Revision ID
(CRID) Functionality.
SMBus Controller Enabled Enabled/Disabled SMBus Controller.
GbE Controller Enabled Enabled/Disabled GbE Controller.
Wake on Lan from S5 Enabled Enabled/Disabled GbE control PME in S5.
SLP_S4 Assertion Stre Enabled Enabled/Disabled SLP_S4# Assertion Stretch.
SLP_S4 Assertion Wid
4-5
Seconds
Select a minimum assertion width of the
SLP_S4# signal.
Deep Sx Disabled
Deep Sx configuration. NOTE: Mobile platforms
support Deep S4/S5 in DC only and Desktop
platforms support Deep S4/S5 in AC only.