User`s manual

This connector is reserved for Advantech's SNMP-1000 HTTP/SNMP

Remote System Manager. The SNMP-1000 allows users to monitor the

internal voltages, temperature and fans from a remote computer through

an Ethernet network.

2.11.6 Connecting to SNMP-1000 remote manager

Use the 6-pin to 8-pin cable to connect the CPU card to SNMP-1000.

This cable comes with the SNMP-1000.

2.12 ATX Power Control Connectors (CN20)

Connect to CN1 on the Advantech backplane to enable the ATX function,

5V stand-by.

2.13 4-pit Auxiliary power connector (CN46 & ATX1)

To supply adequate 12V power to the CPU card, the PCA-6005-B pro-

vides two auxiliary power connectors, CN46 and ATX1. CN46 accepts a

standard device power connector, and ATX1 accepts 4-pin ATX 12V

connector.

Warning: Either CN31 or ATX1 has to be connected, oth-

erwise the system may be unstable.

CN21 CN18

CPU Card

CN19 CN29

SNMP-1000

CN19

PIN 1

CN20