User manual

3 PCA-6028 User Manual
Chapter 1 Hardware Configuration
1.3 Specifications
1.3.1 System
 CPU: LGA1150-socket Core i7/i5/i3 and Pentium series processors
 L3 Cache: Please refer to CPU specification for detail information.
 BIOS: AMI SPI BIOS (128 Mb SPI)
 System Chipset: Intel H81
 SATA hard disk drive interface: Two SATA3 (600MB/s) with blue connectors
and two SATA2 (300MB/s) with black connectors. These interfaces can be
enabled/disabled in the BIOS.
1.3.2 Memory
 RAM:
– PCA-6028: Up to 16 GB in two 240-pin DIMM sockets. Supports dual-chan-
nel DDR3 1333/1600 MHz SDRAM WITHOUT ECC function.
1.3.3 Input/Output
 ISA bus: HISA (ISA high driver)
 PCI bus: Four PCI masters to the backplane, 32-bit, 33 MHz PCI 2.2 compliant.
 Enhanced parallel port: This EPP/SPP/ECP port can be configured to LPT1,
LPT2, LPT3 or disabled. A standard DB-25 female connector provided.
 Serial ports: Two RS-232 serial ports
 PS/2 keyboard and mouse connector:
One 6-pin mini-DIN connectors is
located on the mounting bracket for easy connection to a PS/2 keyboard and
mouse via the Y-cable included in the package.
 USB port: Supports 9 USB 2.0 ports with transfer rate up to 480 Mbps. (5 ports
are on the CPU card and 4 ports are on the backplane), and 3 USB 3.0 ports
with transfer rate up to 5 Gbps.
 LPC: One LPC connector to support Advantech TPM LPC modules.
 GPIO: Supports 8-bit GPIO from super I/O for general purpose control applica-
tion.
Note! PCA-6028 does NOT support PATA(IDE) interface.
Note! 1. Due to the inherent limitations of PC architecture, the system may
not fully detect 16 GB RAM when 16 GB RAM is installed.
2. A 32-bit OS may not fully detect 4 GB of RAM when 4 GB is
installed.