User manual

PCA-6028 User Manual 52
Figure 3.26 Graphics Configuration
 Primary Display
Select which IGFX/PEG/PCI graphics device should be primary display or select
SG for switchable GFX.
 Internal Graphics
Keep IGD enabled based on the setup options.
 Aperture Size
Select the aperture size.
 DVMT Pre-Allocated
Select DVMT5.0 Pre-allocated (fixed) graphics memory size, up to 1024 M,
used by the internal graphics device.
 DVMT Total Gfx Mem
Select 128 M, 256 M or MAX DVMT5.0 total graphics memory size used by the
internal graphics device.
 Gfx Low Power Mode
Enable/Disable Gfx Low power mode.
 LCD Control
Select Primary IGFX Boot Display(VBIOS Default, CRT, DVI1, DVI2)