User manual

53 PCA-6028 User Manual
Chapter 3 AMI BIOS Setup
3.2.3.7 NB PCIe Configuration
Figure 3.27 NB PCIe Configuration
 PEG0-Gen X
Configure auto, Gne1, Gen2, or Gen 3.
 Enable PEG
Enable/Disable/Auto the PEG.
 Detect Non-Compliance Device
Detect Non-Compliance PCI Express Device in PEG
 Program PCIe ASPM after OpROM
Enabled: PCIe ASPM will be programmed after OpROM
Disabled: PCIe ASPM will be programme before OpROM
 PEG0 De-emphasis Control
Configure the De-emphasis control on PEG
 PEG0 ASPM
Control ASPM support for the PEG: Device 1 Function 0. This has no effect if
PEG is not the currently active device.