User`s manual

3
• EIDE interface: Supports up to two IDE devices. BIOS supports up
to 8.4 GB HDD. 32-bit host data transfer, PIO Mode 3 transfer capa-
bilities (>10 MB/sec)
• Floppy disk drive interface: Supports up to two floppy disk drives,
5¼” (360 KB and 1.2 MB) and/or 3½” (720 KB, 1.44 MB, and 2.88
MB)
• Parallel port: One enhanced parallel port, supports EPP/ECP parallel
mode
• Serial ports: Two 16C550 UARTs, one RS-232, one RS-232/422/485
interface
• Watchdog timer: 63-level timer interval, with jumperless setup, gen-
erates system reset or IRQ15
• Keyboard/mouse connector: Mini DIN connector for keyboard and
PS/2 mouse, 5-pin male keyboard connector is also available
• I/O bus expansion: PC/104 connector with face-up installation
• SSD: Supports M-systems DiskOnChip flash disk
• Flash Backup: CMOS Data
Ethernet controller functions (PCA-6145B only)
• Controller: UMC UM9008, built-in 8k x 16 SRAM
• I/O address switchless setting
• Software compatible with NE-1000 and NE-2000
• Loopback capability for diagnostics
• Connector: RJ-45
• Boot ROM: Built-in system BIOS (optional)
Local bus VGA functions
• Controller: VL-bus C&T 65545 VGA controller with Windows
accelerator
• Display memory: 1 MB on-board DRAM
• Display resolution: Supports resolutions up to 1280 x 1024
- Non-interlaced CRT display up to 1024 x 768 with 256 colors
- Flat panel display up to 640 x 480 resolution
- Support True-color and Hi-color display capability
• Display output: DB-15 VGA connector, 22 x 2 pin header general
purpose flat panel display connector