User`s manual

PCA-6145 User’s Manual 50
Driver installation
Step 1: Place the display driver diskette into drive A. Make A the
default drive by typing A: <ENTER>. Run the SETUP program
by typing SETUP <ENTER>. Press any key to display a list of
supported applications. Use the arrow keys to select VESA
Driver Version 1.2 and press <ENTER>. Press the <ENTER>
key to select All Resolutions, and press <END> to begin the
installation. A default drive and directory path will be dis-
played. Use the backspace key to erase this and type in a direc-
tory that is in the directory path (such as C:\BIN or C:\UTILS).
After the files have been installed, press any key to return to the
list of supported applications. Press <ESC> followed by Y to
exit to DOS.
Step 2: To install the VESA driver, type either VESA <ENTER> or
VESA + <ENTER> at the DOS prompt. The optional + com-
mand line parameter enables all of the available modes. Make
sure that your monitor is capable of displaying these high reso-
lution modes before enabling them.
NOTE: If the video BIOS already supports VBE extended
video modes, DO NOT use this driver. Run the
VTEST.EXE program to see if the video BIOS sup-
ports the VBE modes.
5.3.5 Word
These drivers are designed to work with Microsoft Word 5.0 and 5.5.
Driver installation
If you have already installed Word on your computer, go to Step 2 to
install the new video driver.
Step 1: Install Word as normal.
Step 2: After you complete the Word installation, place the display
driver diskette into drive A. Make A the default drive by typing
A: <ENTER>. Run the SETUP program by typing SETUP
<ENTER>. Press any key to display a list of supported applica-
tions. Use the arrow keys to select Word and press <ENTER>.
Use the arrow keys to select the desired screen resolution and
press <ENTER> (make sure your monitor is able to display the
resolution desired). Press <END> to begin the driver installa-