User`s manual

Chapter 4 Award BIOS Setup 39
4.1.9 Integrated Peripherals
ROM PCI/ISA BIOS (2A5IIAKB)
CMOS SETUP UTILITY
AWARD SOFTWARE, INC.
Figure 4-7: Integrated peripherals
Note: If you enable the IDE HDD block mode, the en-
hanced IDE driver will be enabled.
4.1.10 Password setting
To change, confirm, or disable the password, choose the “PASS-
WORD SETTING” option form the Setup main menu and press
[Enter]. The password can be at most 8 characters long.
Remember, to enable this feature. You must first select the Security
Option in the BIOS FEATURES SETUP to be either “Setup” or
“System.” Pressing [Enter] again without typing any characters can
disable the password setting function.
4.1.11 IDE HDD auto detection
“IDE HDD AUTO DETECTION” automatically self-detect for the
correct hard disk type.
Internal PC/IDE : Primary PS/2 mouse function : Disabled
IDE Primary Master PIO : Auto Ethernet Boot ROM : Disabled
IDE Primary Slave PIO : Auto USB Controller : Disabled
Primary Master Ultra DMA : Auto
Primary Slaver Ultra DMA : Auto
IDE Burst Mode : Disabled
IDE Data Port Post Write : Enabled
IDE HDD Block Mode : Enabled
Onboard FDC Controller : Enabled
Onboard Serial Port 1 : 3F8/IRQ4
Onboard Serial Port 2 : 2F8/IRQ3
IR Address Select : Disable
Onboard Parallel Port : 378/IRQ7 Esc : Quit ↑↓→←: Select Item
Onboard Parallel Mode : ECP+EPP F1 : Help PU/PD/+/- : Modify
ECP Mode Use DMA : 3 F5 : Old Values <Shift>F2 : Color
F6 : Load BIOS Defaults
F7 : Load Setup Default