Specifications

Chapter 1 Hardware Configuration 3
Specifications
System
• CPU: Intel Pentium 75/90/100/120/133/150/166/200 MHz
AMD K5, Cyrix M1
• BIOS: AWARD 128 KB memory; supports plug and play
• Chipset: SiS 5596/5513
• L2 cache: Direct map write-back or write-through cache module
- 256 KB/512 KB Synchronous (Pipeline Burst) SRAM
• Green function: Features power management option via BIOS,
activated by keyboard or mouse activity. Supports doze, sleep and
suspend modes. APM 1.1 compliant
• RAM: Two 72-pin SIMM sockets. Supports 32-bit Normal or EDO
DRAM with memory capacity from 1 MB to 64 MB.
• EIDE interface: Handles up to two IDE HDDs (up to 8.4 GB) or
other IDE devices. Supports PIO mode 4 and DMA bus-master
mode
• FDD interface: Supports up to two floppy disk drives.
• Parallel port: Configured to LPT1, LPT2, LPT3 or disabled.
- Supports multi-mode parallel port (SPP/ECP/EPP)
• Serial ports: Two 16C550 UARTs, one RS-232,
one RS-232/422/485 interface
• Watchdog timer: Can generate a system reset or IRQ 15. Software
enabled/disabled. Time interval is from 1 to 63 seconds, jumperless
with run-time setup
• Keyboard/mouse connector: 6-pin mini-DIN connector on the
mounting bracket eases connection to a keyboard or PS/2 mouse.
An on-board keyboard pin header connector is also available.
• I/O bus expansion: PC/104 connector with face-up installation
Mechanical and environmental
• Board size: 185 mm x 122 mm
• Max. power requirements: +5 V (4.75 ~ 5.25 V) @ 5.5 A
• Operating temperature: 32 ~ 140
°
F (0 ~ 60
°
C)
• Board weight: 1.2 lb (0.5 kg)