User manual

SNMP-1000-B2 User Manual 16
3.2.1.2 Control Group
The following items can be set under this command:
 Admin User Name: The SNMP-1000-B2 administrator user name. Only the
administrator is permitted to input the console mode. The default admin user
name is “advantech”.
 Admin User Password: The administrator password. This password enables
users to read and write to SNMP-1000-B2. The default admin user password is
“admin”.
 Community Read-Only: A general password for read-only access.
 The default read-only password is “public”.
 BOOTP/DHCP Control: Enables/disables the BOOTP/DHCP protocol.
 Telnet Control: Enables/disables the Telnet protocol.
 TFTP Upgrade Control: Enables/disables the TFTP protocol for firmware
upgrades through local networks.
 HTTP Security Control: Enables/disables HTTP login password requests.