User manual

17 SNMP-1000-B2 User Manual
Chapter 3 Getting Started
3.2.1.3 Parameter Group
The following items can be set under this command:
 sysDescription: A description of this system. This is an alphanumeric string of
up to 31 bytes. The default value is empty.
 sysContact: The contact information of the entity managing the system. This is
an alphanumeric string of up to 15 bytes. The default value is empty.
 sysName: The name of this system. This is an alphanumeric string of up to 15
bytes. The default name is “Advantech”.
 sysLocation: The location of this system. This is an alphanumeric string of up to
15 bytes. The default value is empty.
3.2.1.4 Access Control Table
This table allows users to restrict SNMP-1000-B2 access from specific IP addresses.
Users can add IP addresses and set the access control. The configuration options
are NoAccess, Read Only, and Read/Write. Workstations cannot display information
if their IP address is set to “NoAccess”.
Press “1” to modify a line in the table. Press “2” to delete a line of data. This table is
used for access via SNMP and HTTP. Access through Telnet or a serial port is only
permitted using the “Admin User Name” and “Admin User Password” in the Control
Group.