User manual

SNMP-1000-B2 User Manual 18
3.2.1.5 Trap Receiver Table
SNMP-1000-B2 can be managed with SNMP-compatible software from a remote
server connected to a network. The IP addresses of SNMP trap receivers can be
added to the list if SNMP-compatible management software is available at the
addresses.
Press “1” to modify a line in the table. Press “2” to delete a line of data. The Severity
Level allows users to specify the alarm level. Traps are not sent if the alarm severity
is lower than the specified level.
3.2.1.6 E-mail Notification Menu
SNMP-1000-B2 can send e-mails to specified e-mail addresses every day at a fixed
time or after an alarm-triggering event.
From this menu, users can configure the following items:
 DNS Address: The IP address of the network domain name server in dotted for-
mat.
 Mail Server: The IP address of the mail server in dotted format.